PartsTable
Technical Data Sheet
Download PDF

123CM10004-5 — BEARING,BALL,ROD END

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

123CM10004-5: BEARING,BALL,ROD END.

The BEARING,BALL,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL COMP E52100 OUTER RING, thread_class: 3A A, alignment_type: SELF-ALIGNING, special_features: SLOT IN SHANK 0.0360 IN. MAX WIDE IN, thread_direction: RIGHT-HAND, nominal_thread_size: 0.312 INCHES IN.

This part is cataloged in the U.S. Government catalog under NSN 3110-00-019-7127, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
123CM10004-5
NSN: 3110-00-019-7127
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 79RG9 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
materialSTEEL COMP E52100 OUTER RING
thread_class3A A
seal_quantity2
alignment_typeSELF-ALIGNING
special_featuresSLOT IN SHANK 0.0360 IN. MAX WIDE IN
thread_directionRIGHT-HAND
nominal_thread_size0.312 INCHES IN
lubrication_materialGREASE
supplementary_featuresFLIGHT SAFETY CRITICAL AIRCRAFT PART
self-alignment_locationINTERNAL
thread_quantity_per_inch24
thread_series_designatorUNF
NSN3110-00-019-7127
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 123CM10004-5 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL: GREASE
•
SUPPLEMENTARY FEATURES: FLIGHT SAFETY CRITICAL AIRCRAFT PART
•
CRITICALITY CODE JUSTIFICATION: SUPP
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.312 INCHES IN
•
ALIGNMENT TYPE: SELF-ALIGNING
TECHNICAL CHARACTERISTICS
LUBRICATION MATERIALGREASE
SUPPLEMENTARY FEATURESFLIGHT SAFETY CRITICAL AIRCRAFT PART
CRITICALITY CODE JUSTIFICATIONSUPP
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.312 INCHES IN
ALIGNMENT TYPESELF-ALIGNING
SPECIAL FEATURESSLOT IN SHANK 0.0360 IN. MAX WIDE IN
SEAL QUANTITY2
THREAD CLASS3A A
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 1
123CM10004-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 123CM10004-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 123CM10004-5?
123CM10004-5 is a BEARING,BALL,ROD END.
What parts can replace 123CM10004-5?
There is 1 known substitute for 123CM10004-5: 123CM10004-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 123CM10004-5?
123CM10004-5 is cataloged in the U.S. Government catalog under NSN 3110-00-019-7127. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 123CM10004-5