PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 123905
123905 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The INSULATOR,PLATE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, overall_width: 0.430 INCHES NOMINAL IN, overall_height: 0.005 INCHES MINIMUM AND 0.007 INCHES MAXIMUM IN, overall_length: 0.970 INCHES NOMINAL IN, surface_finish: 63.0 MICROINCHES OVERALL, first_end_style: CHAMFERED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-832-7883, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
123905
NSN: 5315-00-832-7883
FSC: 5315
CAGE: 07524 — DOVER PUMPS & PROCESS SOLUTIONS SEGMENT INC DBA BLACKMER DIV BLACKMER (USA)
SPECIFICATIONS
materialSTEEL OVERALL
overall_width0.430 INCHES NOMINAL IN
overall_height0.005 INCHES MINIMUM AND 0.007 INCHES MAXIMUM IN
overall_length0.970 INCHES NOMINAL IN
surface_finish63.0 MICROINCHES OVERALL
first_end_styleCHAMFERED
special_featuresTWO HOLES 0.078 IN. DIA,EIGHT HOLES 0.047 IN. @DIA IN
style_designatorFLAT, RECTANGULAR
unable_to_decodeUNABLE TO DECODE
pin_overall_length2.463 INCHES MINIMUM AND 2.473 INCHES MAXIMUM IN
pin_overall_diameter0.2430 INCHES MINIMUM AND 0.2440 INCHES MAXIMUM IN
first_end_taper_angle45.0 DEGREES NOMINAL
NSN5315-00-832-7883
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 123905 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PIN OVERALL DIAMETER: 0.2430 INCHES MINIMUM AND 0.2440 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
•
PIN OVERALL LENGTH: 2.463 INCHES MINIMUM AND 2.473 INCHES MAXIMUM IN
•
FIRST END STYLE: CHAMFERED
•
FIRST END TAPER LENGTH: 0.016 INCHES MINIMUM AND 0.031 INCHES MAXIMUM IN
•
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
SURFACE FINISH: 63.0 MICROINCHES OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
PIN OVERALL DIAMETER0.2430 INCHES MINIMUM AND 0.2440 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
PIN OVERALL LENGTH2.463 INCHES MINIMUM AND 2.473 INCHES MAXIMUM IN
FIRST END STYLECHAMFERED
FIRST END TAPER LENGTH0.016 INCHES MINIMUM AND 0.031 INCHES MAXIMUM IN
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
SURFACE FINISH63.0 MICROINCHES OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
918 22Interchangeable
interchangeable cross-reference
interchangeable
2012-T 22Interchangeable
interchangeable cross-reference
interchangeable
1340Interchangeable
interchangeable cross-reference
interchangeable
7040500Interchangeable
interchangeable cross-reference
interchangeable
821C-303Interchangeable
interchangeable cross-reference
interchangeable
INVOLUTE 30-7Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 123905?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 123905?
123905 is a INSULATOR,PLATE.
What parts can replace 123905?
There are 17 known substitutes for 123905: 918 22, 2012-T 22, 1340 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 123905?
123905 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-832-7883. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 123905

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026