12387350-10C99: PIN,STRAIGHT,HEADED.
The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.077 INCHES MINIMUM AND 0.109 INCHES MAXIMUM IN, diameter: 0.745 INCHES MINIMUM AND 0.747 INCHES MAXIMUM IN, material: STEEL COMP 4037 OR STEEL COMP 4130 OR STEEL COMP 8630 OVERALL, head_style: PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION), chamfer_length: 0.062 INCHES MINIMUM AND 0.094 INCHES MAXIMUM IN, shear_strength: 66280 DOUBLE POUNDS PER SQUARE INCH.
This part is cataloged in the U.S. Government catalog under NSN 5315-01-385-7871, indicating validated use in U.S. government and defense logistics supply chains.
Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
| height | 0.077 INCHES MINIMUM AND 0.109 INCHES MAXIMUM IN |
| diameter | 0.745 INCHES MINIMUM AND 0.747 INCHES MAXIMUM IN |
| material | STEEL COMP 4037 OR STEEL COMP 4130 OR STEEL COMP 8630 OVERALL |
| head_style | PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) |
| chamfer_length | 0.062 INCHES MINIMUM AND 0.094 INCHES MAXIMUM IN |
| shear_strength | 66280 DOUBLE POUNDS PER SQUARE INCH |
| hardness_rating | 26.5 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| special_features | SHANK END MAY HAVE EITHER A CHAMFER OR RADIUS AT THE OPTION OF THEVENDOR |
| style_designator | STRAIGHT |
| pin_chamfer_angle | 14.5 DEGREES MINIMUM AND 15.5 DEGREES MAXIMUM |
| pin_head_diameter | 0.859 INCHES MINIMUM AND 0.891 INCHES MAXIMUM IN |
| surface_treatment | ZINC AND CHROMATE OVERALL |
| NSN | 5315-01-385-7871 |
| CHAMFER LENGTH | 0.062 INCHES MINIMUM AND 0.094 INCHES MAXIMUM IN |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| UNDER HEAD LENGTH | 3.319 INCHES MINIMUM AND 3.339 INCHES MAXIMUM IN |
| PIN CHAMFER ANGLE | 14.5 DEGREES MINIMUM AND 15.5 DEGREES MAXIMUM |
| FIRST HOLE DIAMETER | 0.131 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN |
| HARDNESS RATING | 26.5 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| STYLE DESIGNATOR | STRAIGHT |
| PIN HEAD DIAMETER | 0.859 INCHES MINIMUM AND 0.891 INCHES MAXIMUM IN |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6300 ASSN STD 1ST MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 3RD MATERIAL RESPONSE OVERALL |
| DIAMETER | 0.745 INCHES MINIMUM AND 0.747 INCHES MAXIMUM IN |
No substitute or cross-reference records for this part.