PartsTable
Technical Data Sheet
Download PDF

12386396 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

12386396: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY, first_leg_style: SQUARE, first_leg_width: 2.970 INCHES MINIMUM AND 3.030 INCHES MAXIMUM IN, second_leg_style: SQUARE, second_leg_width: 2.970 INCHES MINIMUM AND 3.030 INCHES MAXIMUM IN, style_designator: ANGLE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-469-5522, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12386396
NSN: 5340-01-469-5522
FSC: 5340 — Hardware, Commercial
CAGE: 80212 — BAE SYSTEMS LAND & ARMAMENTS L.P. (USA)
SPECIFICATIONS
materialALUMINUM ALLOY
first_leg_styleSQUARE
first_leg_width2.970 INCHES MINIMUM AND 3.030 INCHES MAXIMUM IN
second_leg_styleSQUARE
second_leg_width2.970 INCHES MINIMUM AND 3.030 INCHES MAXIMUM IN
style_designatorANGLE
first_leg_slot_width0.406 INCHES MINIMUM AND 0.460 INCHES MAXIMUM IN
first_leg_slot_length1.970 INCHES MINIMUM AND 2.030 INCHES MAXIMUM IN
end_item_identification2350-01-368-9528, CARRIER, COMMAND POST; WSD: BRADLEY
first_leg_hole_arrangement_style3 SLOTS
second_leg_relationship_to_first_legNOT IDENTICAL
first_leg_distance_from_edge_to_hole_center_along_width2.055 INCHES MINIMUM AND 2.115 INCHES MAXIMUM IN
NSN5340-01-469-5522
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12386396 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 1.720 INCHES MINIMUM AND 1.780 INCHES MAXIMUM IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG WIDTH: 2.970 INCHES MINIMUM AND 3.030 INCHES MAXIMUM IN
•
FIRST LEG HOLE ARRANGEMENT STYLE: 3 SLOTS
•
STYLE DESIGNATOR: ANGLE
•
FIRST LEG STYLE: SQUARE
•
FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH: 7.595 INCHES MINIMUM AND 7.655 INCHES MAXIMUM IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH: 2.055 INCHES MINIMUM AND 2.115 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH1.720 INCHES MINIMUM AND 1.780 INCHES MAXIMUM IN
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG WIDTH2.970 INCHES MINIMUM AND 3.030 INCHES MAXIMUM IN
FIRST LEG HOLE ARRANGEMENT STYLE3 SLOTS
STYLE DESIGNATORANGLE
FIRST LEG STYLESQUARE
FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH7.595 INCHES MINIMUM AND 7.655 INCHES MAXIMUM IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH2.055 INCHES MINIMUM AND 2.115 INCHES MAXIMUM IN
FIRST LEG SLOT WIDTH0.406 INCHES MINIMUM AND 0.460 INCHES MAXIMUM IN
FIRST LEG WIDTH2.970 INCHES MINIMUM AND 3.030 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 12386396?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12386396?
12386396 is a BRACKET,ANGLE.
What is the NSN for 12386396?
12386396 is cataloged in the U.S. Government catalog under NSN 5340-01-469-5522. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12386396

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.