PartsTable
Technical Data Sheet
Download PDF

12385232 — HANDLE,MANUAL CONTROL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

12385232: HANDLE,MANUAL CONTROL.

The HANDLE,MANUAL CONTROL is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, overall_width: 1.369 INCHES NOMINAL1.369 INCHES NOMINAL IN, overall_length: 8.970 INCHES MINIMUM AND 8.970 INCHES MINIMUM AND 9.150 INCHES MAXIMUM9.150 INCHES MAXIMUM IN, mounting_method: UNTHREADED HOLE(S)UNTHREADED HOLE(S), style_designator: OFFSET, mounting_facility_diameter: 0.510 INCHES MINIMUM AND 0.510 INCHES MINIMUM AND 0.531 INCHES MAXIMUM0.531 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-382-5989, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12385232
NSN: 5340-01-382-5989
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL OVERALL
overall_width1.369 INCHES NOMINAL1.369 INCHES NOMINAL IN
overall_length8.970 INCHES MINIMUM AND 8.970 INCHES MINIMUM AND 9.150 INCHES MAXIMUM9.150 INCHES MAXIMUM IN
mounting_methodUNTHREADED HOLE(S)UNTHREADED HOLE(S)
style_designatorOFFSET
mounting_facility_diameter0.510 INCHES MINIMUM AND 0.510 INCHES MINIMUM AND 0.531 INCHES MAXIMUM0.531 INCHES MAXIMUM IN
mounting_facility_quantity22
material_document_and_classificationASTMA576 ASSN STD SINGLE MATERIAL RESPONSE OR ASTMA108 ASSN STD SINGLE MATERIAL RESPONSE OR ASTMA36 COMPS 1010-1025 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
center_to_center_distance_between_mounting_facilities_parallel_to_length1.581 INCHES NOMINAL1.581 INCHES NOMINAL IN
NSN5340-01-382-5989
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12385232 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING FACILITY DIAMETER: 0.510 INCHES MINIMUM AND 0.510 INCHES MINIMUM AND 0.531 INCHES MAXIMUM0.531 INCHES MAXIMUM IN
•
MOUNTING FACILITY QUANTITY: 22
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH: 1.581 INCHES NOMINAL1.581 INCHES NOMINAL IN
•
MOUNTING METHOD: UNTHREADED HOLE(S)UNTHREADED HOLE(S)
•
STYLE DESIGNATOR: OFFSET
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTMA576 ASSN STD SINGLE MATERIAL RESPONSE OR ASTMA108 ASSN STD SINGLE MATERIAL RESPONSE OR ASTMA36 COMPS 1010-1025 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
MOUNTING FACILITY DIAMETER0.510 INCHES MINIMUM AND 0.510 INCHES MINIMUM AND 0.531 INCHES MAXIMUM0.531 INCHES MAXIMUM IN
MOUNTING FACILITY QUANTITY22
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH1.581 INCHES NOMINAL1.581 INCHES NOMINAL IN
MOUNTING METHODUNTHREADED HOLE(S)UNTHREADED HOLE(S)
STYLE DESIGNATOROFFSET
MATERIAL DOCUMENT AND CLASSIFICATIONASTMA576 ASSN STD SINGLE MATERIAL RESPONSE OR ASTMA108 ASSN STD SINGLE MATERIAL RESPONSE OR ASTMA36 COMPS 1010-1025 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH8.970 INCHES MINIMUM AND 8.970 INCHES MINIMUM AND 9.150 INCHES MAXIMUM9.150 INCHES MAXIMUM IN
OVERALL WIDTH1.369 INCHES NOMINAL1.369 INCHES NOMINAL IN
SPECIAL FEATURESHANDLE COVERED WITH PLASTIC PLASITOL, MIL-P-20689 TY 1, CL 2, 5.940 IN MIN AND 6.180 IN. MAX FROM HANDLE ENDHANDLE COVERED WITH PLASTIC PLASITOL, MIL-P-20689 TY 1, CL 2, 5.940 IN MIN AND 6.180 IN. MAX FROM HANDLE END IN
MATERIALSTEEL OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 12385232?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12385232?
12385232 is a HANDLE,MANUAL CONTROL.
What is the NSN for 12385232?
12385232 is cataloged in the U.S. Government catalog under NSN 5340-01-382-5989. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12385232

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.