PartsTable
Technical Data Sheet
Download PDF

12383951 — PLATE,MOUNTING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

12383951: PLATE,MOUNTING.

The PLATE,MOUNTING is a the manufacturer industrial component. Key specifications include shape: RECTANGULAR, width: 0.750 INCHES NOMINAL0.750 INCHES NOMINAL IN, length: 5.750 INCHES NOMINAL5.750 INCHES NOMINAL IN, material: ALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 5086 OR ALUMINUM ALLOY 5083, thickness: 0.125 INCHES NOMINAL0.125 INCHES NOMINAL IN, surface_treatment: PAINT. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-369-6237, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12383951
NSN: 5340-01-369-6237
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
shapeRECTANGULAR
width0.750 INCHES NOMINAL0.750 INCHES NOMINAL IN
length5.750 INCHES NOMINAL5.750 INCHES NOMINAL IN
materialALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 5086 OR ALUMINUM ALLOY 5083
thickness0.125 INCHES NOMINAL0.125 INCHES NOMINAL IN
special_featuresCOLOR LIGHT GREEN NO. 24533; MOUNTING CONFIGURATION: THREE PAIR HOLES CTR 1.250 IN. APART ALONG C/LINE,0.375 IN. CTR TO END IN
surface_treatmentPAINT
mounting_hole_typeUNTHREADED
mounting_hole_diameter0.232 INCHES MINIMUM AND 0.258 INCHES MAXIMUM ALL HOLES IN
mounting_hole_quantity6
material_document_and_classificationQQ-A-250/11 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-250/7 FED SPEC 2ND MATERIAL RESPONSE OR QQ-A-250/6 FED SPEC 3RD MATERIAL RESPONSE OR QQ-A-200/8 FED SPEC 4TH MATERIAL RESPONSE
NSN5340-01-369-6237
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12383951 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 6
•
LENGTH: 5.750 INCHES NOMINAL5.750 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/11 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-250/7 FED SPEC 2ND MATERIAL RESPONSE OR QQ-A-250/6 FED SPEC 3RD MATERIAL RESPONSE OR QQ-A-200/8 FED SPEC 4TH MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 0.232 INCHES MINIMUM AND 0.258 INCHES MAXIMUM ALL HOLES IN
•
SHAPE: RECTANGULAR
•
SURFACE TREATMENT: PAINT
•
WIDTH: 0.750 INCHES NOMINAL0.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY6
LENGTH5.750 INCHES NOMINAL5.750 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/11 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-250/7 FED SPEC 2ND MATERIAL RESPONSE OR QQ-A-250/6 FED SPEC 3RD MATERIAL RESPONSE OR QQ-A-200/8 FED SPEC 4TH MATERIAL RESPONSE
MOUNTING HOLE DIAMETER0.232 INCHES MINIMUM AND 0.258 INCHES MAXIMUM ALL HOLES IN
SHAPERECTANGULAR
SPECIAL FEATURESCOLOR LIGHT GREEN NO. 24533; MOUNTING CONFIGURATION: THREE PAIR HOLES CTR 1.250 IN. APART ALONG C/LINE,0.375 IN. CTR TO END IN
SURFACE TREATMENTPAINT
WIDTH0.750 INCHES NOMINAL0.750 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 5086 OR ALUMINUM ALLOY 5083
THICKNESS0.125 INCHES NOMINAL0.125 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 12383951?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12383951?
12383951 is a PLATE,MOUNTING.
What is the NSN for 12383951?
12383951 is cataloged in the U.S. Government catalog under NSN 5340-01-369-6237. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12383951

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.