PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 123830
123830 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SAW,HAND,CROSSCUT is a the manufacturer industrial component. Key specifications include blade_length: 6.500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-035-8773, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
123830
NSN: 5305-01-035-8773
FSC: 5305
CAGE: 12603 — CLARK EQUIPMENT CO (USA)
SPECIFICATIONS
blade_length6.500 INCHES NOMINAL IN
special_featuresGLASS-FILLED NYLON HANDLE; COARSE BLADE FOR WOOD CUTTING; BLADE RETRACTS INTO HANDLE; 7.76 IN. CLOSED LG; 13.86 IN. OPEN LG IN
NSN5305-01-035-8773
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 123830 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD CLASS: 3A A
•
MATERIAL: STEEL OVERALL
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
HARDNESS RATING: 23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
•
WIDTH BETWEEN FLATS: 0.968 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.750 INCHES IN
•
FASTENER LENGTH: 3.870 INCHES MINIMUM AND 3.930 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD CLASS3A A
MATERIALSTEEL OVERALL
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
MATERIAL DOCUMENT AND CLASSIFICATIONSAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
HARDNESS RATING23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
WIDTH BETWEEN FLATS0.968 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.750 INCHES IN
FASTENER LENGTH3.870 INCHES MINIMUM AND 3.930 INCHES MAXIMUM IN
HEAD HEIGHT0.450 INCHES MINIMUM AND 0.480 INCHES MAXIMUM IN
THREAD QUANTITY PER INCH10
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
46048Interchangeable
interchangeable cross-reference
interchangeable
123830Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 123830?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 123830?
123830 is a SAW,HAND,CROSSCUT.
What parts can replace 123830?
There are 2 known substitutes for 123830: 46048, 123830. Substitute compatibility should be verified for your specific system.
What is the NSN for 123830?
123830 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-035-8773. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 123830

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026