PartsTable
Technical Data Sheet
Download PDF

123814 — CAP,PILLOW BLOCK

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

123814: CAP,PILLOW BLOCK.

The CAP,PILLOW BLOCK is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, peripheral_diameter: 4.688 INCHES NOMINAL IN, center_hole_diameter: 3.312 INCHES NOMINAL IN, cross-sectional_height: 0.375 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-012-3814, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
123814
NSN: 5305-00-012-3814
NIINs: 000123814, 011004032, 014514227
FSC: 5305 — Screws
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
peripheral_diameter4.688 INCHES NOMINAL IN
center_hole_diameter3.312 INCHES NOMINAL IN
cross-sectional_height0.375 INCHES NOMINAL IN
cross-sectional_shape_styleU
NSN5305-00-012-3814
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 123814 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.234 INCHES NOMINAL IN
•
FASTENER LENGTH: 1.375 INCHES NOMINAL IN
•
THREAD LENGTH: 1.000 INCHES MINIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 1 OR 2 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.375 INCHES IN
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
•
WIDTH BETWEEN FLATS: 0.562 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.234 INCHES NOMINAL IN
FASTENER LENGTH1.375 INCHES NOMINAL IN
THREAD LENGTH1.000 INCHES MINIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE GR 1 OR 2 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.375 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.562 INCHES NOMINAL IN
NONDEFINITIVE SPEC/STD DATA2 TYPE AND 10P STYLE
SURFACE TREATMENTCADMIUM OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
FFS85TYPE2STYLE10PReference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 123814?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 123814?
123814 is a CAP,PILLOW BLOCK.
What parts can replace 123814?
There is 1 known substitute for 123814: FFS85TYPE2STYLE10P. Substitute compatibility should be verified for your specific system.
What is the NSN for 123814?
123814 is cataloged in the U.S. Government catalog under NSN 5305-00-012-3814. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 123814

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.