PartsTable
Technical Data Sheet
Download PDF

12375374 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

12375374: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL, first_leg_style: SQUARE, first_leg_width: 14.250 INCHES NOMINAL IN, first_leg_length: 2.000 INCHES NOMINAL IN, second_leg_style: SQUARE AND TAPERED, second_leg_width: 14.250 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-212-8476, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12375374
NSN: 5340-01-212-8476
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL
first_leg_styleSQUARE
first_leg_width14.250 INCHES NOMINAL IN
first_leg_length2.000 INCHES NOMINAL IN
second_leg_styleSQUARE AND TAPERED
second_leg_width14.250 INCHES NOMINAL IN
special_featuresFINISH COAT-GREEN 383; SPEC MIL-C-46168;FILM THICKNESS APPLY MIL-STD-193
style_designatorANGLE
second_leg_length6.750 INCHES NOMINAL IN
first_leg_thickness0.250 INCHES NOMINAL IN
second_leg_end_width4.500 INCHES NOMINAL IN
second_leg_thickness0.250 INCHES NOMINAL IN
NSN5340-01-212-8476
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12375374 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.746 INCHES NOMINAL IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.750 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.531 INCHES NOMINAL IN
•
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH: 12.750 INCHES NOMINAL IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG LENGTH: 1.874 INCHES NOMINAL IN
•
SECOND LEG HOLE DIAMETER: 0.531 INCHES NOMINAL IN
•
SECOND LEG WIDTH: 14.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.746 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.750 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER0.531 INCHES NOMINAL IN
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH12.750 INCHES NOMINAL IN
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG LENGTH1.874 INCHES NOMINAL IN
SECOND LEG HOLE DIAMETER0.531 INCHES NOMINAL IN
SECOND LEG WIDTH14.250 INCHES NOMINAL IN
SECOND LEG LENGTH6.750 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLETWO HOLES
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
12301096Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 12375374?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12375374?
12375374 is a BRACKET,ANGLE.
What parts can replace 12375374?
There is 1 known substitute for 12375374: 12301096. Substitute compatibility should be verified for your specific system.
What is the NSN for 12375374?
12375374 is cataloged in the U.S. Government catalog under NSN 5340-01-212-8476. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12375374

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.