PartsTable
Technical Data Sheet
Download PDF

12374733 — CAP,PROTECTIVE,DUST AND MOISTURE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

12374733: CAP,PROTECTIVE,DUST AND MOISTURE.

CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include material: ALUMINUM ALLOY 6061, design_type: FRICTION, overall_diameter: 1.000 INCHES NOMINAL IN, special_features: COAT WITH CHEMICAL FILM IN ACCORDANCE WITH MIL-C-5541, CLASS 3, material_document_and_classification: QQ-A-250/11, ALLOY 6061, T6 FED SPEC SINGLE MATERIAL RESPONSE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-466-7813, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12374733
NSN: 5340-01-466-7813
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 6061
design_typeFRICTION
overall_diameter1.000 INCHES NOMINAL IN
special_featuresCOAT WITH CHEMICAL FILM IN ACCORDANCE WITH MIL-C-5541, CLASS 3
material_document_and_classificationQQ-A-250/11, ALLOY 6061, T6 FED SPEC SINGLE MATERIAL RESPONSE
NSN5340-01-466-7813
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12374733 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: FRICTION
•
OVERALL DIAMETER: 1.000 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/11, ALLOY 6061, T6 FED SPEC SINGLE MATERIAL RESPONSE
•
MATERIAL: ALUMINUM ALLOY 6061
TECHNICAL CHARACTERISTICS
DESIGN TYPEFRICTION
OVERALL DIAMETER1.000 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/11, ALLOY 6061, T6 FED SPEC SINGLE MATERIAL RESPONSE
SPECIAL FEATURESCOAT WITH CHEMICAL FILM IN ACCORDANCE WITH MIL-C-5541, CLASS 3
MATERIALALUMINUM ALLOY 6061
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 12374733?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12374733?
12374733 is a CAP,PROTECTIVE,DUST AND MOISTURE.
What is the NSN for 12374733?
12374733 is cataloged in the U.S. Government catalog under NSN 5340-01-466-7813. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12374733