123712: SHIELDING BEAD,ELECTRONIC.
The SHIELDING BEAD,ELECTRONIC is a Hama industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.096 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN, thread_length: 0.534 INCHES MINIMUM AND 0.558 INCHES MAXIMUM IN, fastener_length: 0.578 INCHES MINIMUM AND 0.608 INCHES MAXIMUM IN, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.
Government catalog under NSN 5305-01-193-2361, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| head_style | FLAT COUNTERSUNK |
| thread_class | 2A A |
| head_diameter | 0.096 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN |
| thread_length | 0.534 INCHES MINIMUM AND 0.558 INCHES MAXIMUM IN |
| fastener_length | 0.578 INCHES MINIMUM AND 0.608 INCHES MAXIMUM IN |
| thread_direction | RIGHT-HAND |
| countersink_angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| internal_drive_style | SLOT |
| nominal_thread_diameter | 0.060 INCHES IN |
| screw_surface_treatment | PASSIVATE |
| thread_quantity_per_inch | 80 |
| thread_series_designator | UNF |
| NSN | 5305-01-193-2361 |
| SCREW SURFACE TREATMENT | PASSIVATE |
| FASTENER LENGTH | 0.578 INCHES MINIMUM AND 0.608 INCHES MAXIMUM IN |
| SCREW MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE |
| THREAD LENGTH | 0.534 INCHES MINIMUM AND 0.558 INCHES MAXIMUM IN |
| NOMINAL THREAD DIAMETER | 0.060 INCHES IN |
| HEAD STYLE | FLAT COUNTERSUNK |
| THREAD DIRECTION | RIGHT-HAND |
| SCREW MATERIAL | STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 |
| INTERNAL DRIVE STYLE | SLOT |
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
No substitute or cross-reference records for this part.