PartsTable
Technical Data Sheet
Download PDF

12370769 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

12370769: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, length: 0.33 INCHES MINIMUM AND 0.47 INCHES MAXIMUM IN, material: STEEL COMP 1045 ACTUATOR ARM, overall_height: 0.690 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN, smallest_width: 0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM IN, overall_diameter: 0.345 INCHES MINIMUM AND 0.405 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-353-1964, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12370769
NSN: 5340-01-353-1964
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
width0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
length0.33 INCHES MINIMUM AND 0.47 INCHES MAXIMUM IN
materialSTEEL COMP 1045 ACTUATOR ARM
hole_quantity1
overall_height0.690 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
smallest_width0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM IN
overall_diameter0.345 INCHES MINIMUM AND 0.405 INCHES MAXIMUM IN
special_featuresMATERIAL: STEEL, CARBON STRIP ASTM 1045 THRU 1095 (REF: UNS 610450 THRU G10950) .032 STOCK
style_designatorU-SHAPED
supplementary_featuresHEAT TREAT: QUENCH AND TEMPER PER MIL-H-6875, HARDNESS IS ROCKWELL C40-60 (EQUIVALENT)
specification/standard_data96906-DOD-STD-00100D GOVERNMENT STANDARD AND 80204-ANSI Y14.3M-82 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
part_name_assigned_by_controlling_agencyCLIP, SPRING
NSN5340-01-353-1964
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12370769 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.33 INCHES MINIMUM AND 0.47 INCHES MAXIMUM IN
•
OVERALL DIAMETER: 0.345 INCHES MINIMUM AND 0.405 INCHES MAXIMUM IN
•
SUPPLEMENTARY FEATURES: HEAT TREAT: QUENCH AND TEMPER PER MIL-H-6875, HARDNESS IS ROCKWELL C40-60 (EQUIVALENT)
•
STYLE DESIGNATOR: U-SHAPED
•
SMALLEST WIDTH: 0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM IN
•
SPECIFICATION/STANDARD DATA: 96906-DOD-STD-00100D GOVERNMENT STANDARD AND 80204-ANSI Y14.3M-82 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.690 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
LENGTH0.33 INCHES MINIMUM AND 0.47 INCHES MAXIMUM IN
OVERALL DIAMETER0.345 INCHES MINIMUM AND 0.405 INCHES MAXIMUM IN
SUPPLEMENTARY FEATURESHEAT TREAT: QUENCH AND TEMPER PER MIL-H-6875, HARDNESS IS ROCKWELL C40-60 (EQUIVALENT)
STYLE DESIGNATORU-SHAPED
SMALLEST WIDTH0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM IN
SPECIFICATION/STANDARD DATA96906-DOD-STD-00100D GOVERNMENT STANDARD AND 80204-ANSI Y14.3M-82 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SPECIAL FEATURESMATERIAL: STEEL, CARBON STRIP ASTM 1045 THRU 1095 (REF: UNS 610450 THRU G10950) .032 STOCK
WIDTH0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
PART NAME ASSIGNED BY CONTROLLING AGENCYCLIP, SPRING
SUBSTITUTES & CROSS-REFERENCES 2
4508-37-37-2CReference document
Same NSN cross-reference
Reference document — Secondary reference
4508-37-2CReference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 12370769?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12370769?
12370769 is a CLIP,SPRING TENSION.
What parts can replace 12370769?
There are 2 known substitutes for 12370769: 4508-37-37-2C, 4508-37-2C. Substitute compatibility should be verified for your specific system.
What is the NSN for 12370769?
12370769 is cataloged in the U.S. Government catalog under NSN 5340-01-353-1964. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12370769

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.