PartsTable
Technical Data Sheet
Download PDF

12369980-4 — BRACKET,MOUNTING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

12369980-4: BRACKET,MOUNTING.

The BRACKET,MOUNTING is a the manufacturer industrial component. Key specifications include material: STEEL, overall_width: 1.000 INCHES NOMINAL IN, overall_height: 0.380 INCHES NOMINAL IN, overall_length: 3.560 INCHES MINIMUM AND 3.750 INCHES MAXIMUM IN, mounting_hole_diameter: 0.270 INCHES MINIMUM AND 0.336 INCHES MAXIMUM IN, material_document_and_classification: ASTMA569 ASSN STD SINGLE MATERIAL RESPONSE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-418-9120, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12369980-4
NSN: 5340-01-418-9120
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL
overall_width1.000 INCHES NOMINAL IN
overall_height0.380 INCHES NOMINAL IN
overall_length3.560 INCHES MINIMUM AND 3.750 INCHES MAXIMUM IN
mounting_hole_diameter0.270 INCHES MINIMUM AND 0.336 INCHES MAXIMUM IN
mounting_hole_quantity2
material_document_and_classificationASTMA569 ASSN STD SINGLE MATERIAL RESPONSE
NSN5340-01-418-9120
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12369980-4 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 2
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTMA569 ASSN STD SINGLE MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 0.270 INCHES MINIMUM AND 0.336 INCHES MAXIMUM IN
•
MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY2
OVERALL HEIGHT0.380 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTMA569 ASSN STD SINGLE MATERIAL RESPONSE
MOUNTING HOLE DIAMETER0.270 INCHES MINIMUM AND 0.336 INCHES MAXIMUM IN
OVERALL LENGTH3.560 INCHES MINIMUM AND 3.750 INCHES MAXIMUM IN
OVERALL WIDTH1.000 INCHES NOMINAL IN
MATERIALSTEEL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 12369980-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12369980-4?
12369980-4 is a BRACKET,MOUNTING.
What is the NSN for 12369980-4?
12369980-4 is cataloged in the U.S. Government catalog under NSN 5340-01-418-9120. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12369980-4