PartsTable
Technical Data Sheet
Download PDF

12367329 — PAD,CUSHIONING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

12367329: PAD,CUSHIONING.

The PAD,CUSHIONING is a the manufacturer industrial component. Key specifications include width: 17.000 INCHES NOMINAL IN, length: 10.000 INCHES NOMINAL IN, material: RUBBER SYNTHETIC CUSHIONING, thickness: 0.250 INCHES NOMINAL IN, supplementary_features: END ITEM 2350-01-390-4683, end_item_identification: M88A2 HERCULES RECOVERY VEHICLE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-510-0795, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12367329
NSN: 5340-01-510-0795
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
width17.000 INCHES NOMINAL IN
length10.000 INCHES NOMINAL IN
materialRUBBER SYNTHETIC CUSHIONING
thickness0.250 INCHES NOMINAL IN
supplementary_featuresEND ITEM 2350-01-390-4683
end_item_identificationM88A2 HERCULES RECOVERY VEHICLE
part_name_assigned_by_controlling_agencyPARTITION APU COMPARTMENT
NSN5340-01-510-0795
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12367329 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 10.000 INCHES NOMINAL IN
•
SUPPLEMENTARY FEATURES: END ITEM 2350-01-390-4683
•
WIDTH: 17.000 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC CUSHIONING
•
THICKNESS: 0.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
LENGTH10.000 INCHES NOMINAL IN
SUPPLEMENTARY FEATURESEND ITEM 2350-01-390-4683
SPECIAL FEATURESTHIS PARTITION IS 17.000 INCHES LONG AT THE BOTTOM AND 15.000 INCHES LONG AT THE TOP. THE TOP LEFT CORNER HAS A CUT OUT, STARTING 10.000 INCHES OVER FROM THE RIGHT CORNER GO DOWN 1 INCH AND THEN OVER TERMINATING AT THE LEFT COORNER. THERE ARE TWO HOLES AT IN
WIDTH17.000 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYPARTITION APU COMPARTMENT
END ITEM IDENTIFICATIONM88A2 HERCULES RECOVERY VEHICLE
MATERIALRUBBER SYNTHETIC CUSHIONING
THICKNESS0.250 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 12367329?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12367329?
12367329 is a PAD,CUSHIONING.
What is the NSN for 12367329?
12367329 is cataloged in the U.S. Government catalog under NSN 5340-01-510-0795. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12367329