The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include seat_angle: 37.0 DEGREES FIRST END, temp_rating: -40.0 FAHRENHEIT AND 212.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 2B FIRST END, connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 0.250 INCHES NOMINAL IN, connection_style: SWIVEL NUT FLARE FIRST END. This part is cataloged in the U.S.
Government catalog under NSN 4720-01-485-9251, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
12365278-146
NSN:4720-01-485-9251 FSC:4720 — Hose and Flexible Tubing CAGE:87373 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV HOSE PRODUCTS DIVISION (USA)
SPECIFICATIONS
seat_angle
37.0 DEGREES FIRST END
temp_rating
-40.0 FAHRENHEIT AND 212.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class
2B FIRST END
connection_type
THREADED INTERNAL TUBE FIRST END
inside_diameter
0.250 INCHES NOMINAL IN
connection_style
SWIVEL NUT FLARE FIRST END
outside_diameter
0.600 INCHES NOMINAL IN
special_features
INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC; ASSEMBLY SHALL BE COMPATIBLE WITH HYDRAULIC FLUID PER MIL-H-46170, TYPE 1
thread_direction
RIGHT-HAND FIRST END
operating_pressure
1500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure
23000.0 POUNDS PER SQUARE INCH LBS
nominal_thread_size
0.438 INCHES FIRST END IN
NSN
4720-01-485-9251
COMPONENT DIAGRAM
KEY FEATURES
•
MEASURING METHOD AND LENGTH: 107.000 INCHES NOMINAL OVERALL IN
•
TEMP RATING: -40.0 FAHRENHEIT AND 212.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
FITTING COMPONENT AND SURFACE TREATMENT: COMPLETE FITTING ZINC FIRST END
•
MINIMUM INSIDE BENDING RADIUS: 4.000 INCHES IN
•
CONNECTION STYLE: SWIVEL NUT FLARE FIRST END
•
END CONNECTION DESIGN: STRAIGHT FIRST END
•
LAYER COMPOSITION AND LOCATION: 2ND LAYER BRAIDED WIRE AND 2ND LAYER MOLDED RUBBER, SYNTHETIC AND 4TH LAYER BRAIDED WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
•
CONNECTION TYPE: THREADED INTERNAL TUBE FIRST END
TECHNICAL CHARACTERISTICS
MEASURING METHOD AND LENGTH
107.000 INCHES NOMINAL OVERALL IN
TEMP RATING
-40.0 FAHRENHEIT AND 212.0 FAHRENHEIT SINGLE RESPONSE DEGF
FITTING COMPONENT AND SURFACE TREATMENT
COMPLETE FITTING ZINC FIRST END
MINIMUM INSIDE BENDING RADIUS
4.000 INCHES IN
CONNECTION STYLE
SWIVEL NUT FLARE FIRST END
END CONNECTION DESIGN
STRAIGHT FIRST END
LAYER COMPOSITION AND LOCATION
2ND LAYER BRAIDED WIRE AND 2ND LAYER MOLDED RUBBER, SYNTHETIC AND 4TH LAYER BRAIDED WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
CONNECTION TYPE
THREADED INTERNAL TUBE FIRST END
CROSS-SECTIONAL SHAPE STYLE
ROUND
OUTSIDE DIAMETER
0.600 INCHES NOMINAL IN
OTHER ITEMS IN FSC 4720 — Hose and Flexible Tubing
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12365278-146?
12365278-146 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace 12365278-146?
There is 1 known substitute for 12365278-146: 12365278. Substitute compatibility should be verified for your specific system.
What is the NSN for 12365278-146?
12365278-146 is cataloged in the U.S. Government catalog under NSN 4720-01-485-9251. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.