The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 5083 OR ALUMINUM ALLOY 5086, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: SQUARE, first_leg_width: 3.500 INCHES NOMINAL IN, first_leg_length: 1.500 INCHES NOMINAL IN, second_leg_style: SQUARE. This part is cataloged in the U.S.
Government catalog under NSN 5340-01-310-7067, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
12358714
NSN:5340-01-310-7067 FSC:5340 — Hardware, Commercial CAGE:19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
material
ALUMINUM ALLOY 5083 OR ALUMINUM ALLOY 5086
first_leg_angle
90.0 DEGREES NOMINAL
first_leg_style
SQUARE
first_leg_width
3.500 INCHES NOMINAL IN
first_leg_length
1.500 INCHES NOMINAL IN
second_leg_style
SQUARE
second_leg_width
3.500 INCHES NOMINAL IN
special_features
ONE ADDITIONAL HOLE LOCATED ALONG EDGE OF FIRST LEG,0.380 IN. MIN AND 0.416 IN. MAX DIA,0.620 IN. DEEP IN
style_designator
ANGLE
second_leg_length
3.190 INCHES NOMINAL IN
surface_treatment
PLASTIC EPOXY AND PLASTIC POLYAMIDE
mounting_hole_type
COUNTERSUNK AND PLAIN
NSN
5340-01-310-7067
COMPONENT DIAGRAM
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.630 INCHES NOMINAL IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.935 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH: 2.250 INCHES NOMINAL IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-22750 TY 1 MIL SPEC ALL TREATMENT RESPONSES
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
0.630 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
0.935 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER
0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
FIRST LEG ANGLE
90.0 DEGREES NOMINAL
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH
2.250 INCHES NOMINAL IN
SECOND LEG RELATIONSHIP TO FIRST LEG
NOT IDENTICAL
SECOND LEG HOLE DIAMETER
0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
MIL-C-22750 TY 1 MIL SPEC ALL TREATMENT RESPONSES
SECOND LEG WIDTH
3.500 INCHES NOMINAL IN
SECOND LEG LENGTH
3.190 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12358714?
12358714 is a BRACKET,ANGLE.
What is the NSN for 12358714?
12358714 is cataloged in the U.S. Government catalog under NSN 5340-01-310-7067. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.