PartsTable
Technical Data Sheet
Download PDF

12354745-2 — SEAL,PLAIN ENCASED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

12354745-2: SEAL,PLAIN ENCASED.

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SEALING ELEMENT, case_style: SQUARE, seal_width: 0.422 INCHES MINIMUM AND 0.452 INCHES MAXIMUM IN, housing_bore_diameter: 2.127 INCHES MINIMUM AND 2.131 INCHES MAXIMUM IN, sealing_element_style: VERTICAL, accommodated_shaft_diameter: 1.441 INCHES MINIMUM AND 1.471 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-252-5303, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12354745-2
NSN: 5330-01-252-5303
FSC: 5330 — Packing and Gasket Materials
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialRUBBER SEALING ELEMENT
case_styleSQUARE
seal_width0.422 INCHES MINIMUM AND 0.452 INCHES MAXIMUM IN
housing_bore_diameter2.127 INCHES MINIMUM AND 2.131 INCHES MAXIMUM IN
sealing_element_styleVERTICAL
accommodated_shaft_diameter1.441 INCHES MINIMUM AND 1.471 INCHES MAXIMUM IN
NSN5330-01-252-5303
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12354745-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.422 INCHES MINIMUM AND 0.452 INCHES MAXIMUM IN
•
SEALING ELEMENT STYLE: VERTICAL
•
HOUSING BORE DIAMETER: 2.127 INCHES MINIMUM AND 2.131 INCHES MAXIMUM IN
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 1.441 INCHES MINIMUM AND 1.471 INCHES MAXIMUM IN
•
MATERIAL: STEEL CASE
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.422 INCHES MINIMUM AND 0.452 INCHES MAXIMUM IN
SEALING ELEMENT STYLEVERTICAL
HOUSING BORE DIAMETER2.127 INCHES MINIMUM AND 2.131 INCHES MAXIMUM IN
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER1.441 INCHES MINIMUM AND 1.471 INCHES MAXIMUM IN
MATERIALSTEEL CASE
MATERIALSTEEL CORROSION RESISTING SPRING
MATERIALRUBBER SEALING ELEMENT
SUBSTITUTES & CROSS-REFERENCES 2
150-212-14-11CW90Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
532969Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 12354745-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12354745-2?
12354745-2 is a SEAL,PLAIN ENCASED.
What parts can replace 12354745-2?
There are 2 known substitutes for 12354745-2: 150-212-14-11CW90, 532969. Substitute compatibility should be verified for your specific system.
What is the NSN for 12354745-2?
12354745-2 is cataloged in the U.S. Government catalog under NSN 5330-01-252-5303. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12354745-2