PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 12354499-09
12354499-09 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include material: RUBBER CHLOROPRENE CLASS CR, design_type: FRICTION, overall_diameter: 1.380 INCHES NOMINAL IN, inside_diameter_length: 1.620 INCHES NOMINAL IN, end_item_identification: USED ON DSESTS TIS, round_cap_outside_surface_condition: SMOOTH. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-224-6382, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12354499-09
NSN: 5340-01-224-6382
FSC: 5340
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR
design_typeFRICTION
overall_diameter1.380 INCHES NOMINAL IN
inside_diameter_length1.620 INCHES NOMINAL IN
end_item_identificationUSED ON DSESTS TIS
round_cap_outside_surface_conditionSMOOTH
opening_inside_diameter_for_which_designed0.920 INCHES NOMINAL IN
NSN5340-01-224-6382
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12354499-09 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: FRICTION
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR
•
OVERALL DIAMETER: 1.380 INCHES NOMINAL IN
•
ROUND CAP OUTSIDE SURFACE CONDITION: SMOOTH
•
INSIDE DIAMETER LENGTH: 1.620 INCHES NOMINAL IN
•
OPENING INSIDE DIAMETER FOR WHICH DESIGNED: 0.920 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
END ITEM IDENTIFICATIONUSED ON DSESTS TIS
DESIGN TYPEFRICTION
MATERIALRUBBER CHLOROPRENE CLASS CR
OVERALL DIAMETER1.380 INCHES NOMINAL IN
ROUND CAP OUTSIDE SURFACE CONDITIONSMOOTH
INSIDE DIAMETER LENGTH1.620 INCHES NOMINAL IN
OPENING INSIDE DIAMETER FOR WHICH DESIGNED0.920 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
3500-23Interchangeable
interchangeable cross-reference
interchangeable
6166852-1Interchangeable
interchangeable cross-reference
interchangeable
52-001Interchangeable
interchangeable cross-reference
interchangeable
TS57698Interchangeable
interchangeable cross-reference
interchangeable
667-154-09Interchangeable
interchangeable cross-reference
interchangeable
9451827-21Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 12354499-09?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12354499-09?
12354499-09 is a CAP,PROTECTIVE,DUST AND MOISTURE.
What parts can replace 12354499-09?
There are 6 known substitutes for 12354499-09: 3500-23, 6166852-1, 52-001 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 12354499-09?
12354499-09 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-224-6382. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12354499-09

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026