PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 123486
123486 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PIVOT,NUTATING PLATE is a the manufacturer industrial component. Key specifications include length: 19.500 INCHES NOMINAL IN, material: STEEL, unit_type: WHIP, WIRE, load_capacity: 60.0 QUARTS MAXIMUM, fsc_application_data: HOBART MODEL V1401,M802,L800,H600 MIXING MACHINES. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-211-9630, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
123486
NSN: 5330-00-211-9630
FSC: 5330
CAGE: 77237 — DANA OFF HIGHWAY PRODUCTS, LLC (USA)
SPECIFICATIONS
length19.500 INCHES NOMINAL IN
materialSTEEL
unit_typeWHIP, WIRE
load_capacity60.0 QUARTS MAXIMUM
fsc_application_dataHOBART MODEL V1401,M802,L800,H600 MIXING MACHINES
NSN5330-00-211-9630
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 123486 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
80950Interchangeable
interchangeable cross-reference
interchangeable
1414Interchangeable
interchangeable cross-reference
interchangeable
HF2149Interchangeable
interchangeable cross-reference
interchangeable
12348-6Interchangeable
interchangeable cross-reference
interchangeable
931576Interchangeable
interchangeable cross-reference
interchangeable
DS-931576Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 123486?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 123486?
123486 is a PIVOT,NUTATING PLATE.
What parts can replace 123486?
There are 12 known substitutes for 123486: 80950, 1414, HF2149 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 123486?
123486 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-211-9630. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 123486

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026