PartsTable
Technical Data Sheet
Download PDF

12347 — CIRCUIT CARD ASSEMBLY

✓ Government record, cited
Hama · COMPONENT
PRODUCT OVERVIEW

12347: CIRCUIT CARD ASSEMBLY.

The CIRCUIT CARD ASSEMBLY is a Hama industrial component. Key specifications include material: STEEL OVERALL, point_type: CONVENTIONAL, ring_style: EXPANDING CONCENTRIC, joint_style: INTERLOCKING JOINT, point_angle: 118.0 DEGREES NOMINAL, shank_style: STANDARD TAPER W/TANG. This part is cataloged in the U.S.

Government catalog under NSN 5133-00-228-1398, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12347
NSN: 5133-00-228-1398
NIINs: 002281398, 007287449, 011438594, 015511848
FSC: 5133 — Drill Bits, Counterbores, and Countersinks: Hand and Machine
CAGE: 13130 — CLEVELAND TWIST DRILL CO DIV OF GREENFIELD INDUSTRIES INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
point_typeCONVENTIONAL
ring_styleEXPANDING CONCENTRIC
joint_styleINTERLOCKING JOINT
point_angle118.0 DEGREES NOMINAL
shank_styleSTANDARD TAPER W/TANG
flute_length10.125 INCHES NOMINAL IN
overall_width0.0940 INCHES NOMINAL IN
flute_quantity2
overall_length17.125 INCHES NOMINAL IN
outside_diameter0.750 INCHES NOMINAL IN
special_featuresTAPER SHANK LG; FRACTIONAL SIZE 1-27/32
NSN5133-00-228-1398
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR MFR: Hama CIRCUIT CARD ASSEMBLY TITLE COMPONENT PN 12347 MFR Hama CIRCUIT CARD ASSEMBLY
KEY FEATURES
•
CUTTING END STYLE: GENERAL PURPOSE
•
TAPER SHANK SIZE DESIGNATOR: 5 MORSE
•
FLUTE LENGTH: 10.125 INCHES NOMINAL IN
•
NOMINAL CUTTING DIAMETER: 1.8438 INCHES IN
•
CUTTING ROTATION DIRECTION: RIGHT-HAND
•
SPECIFICATION/STANDARD DATA: 05047-ASME B94.11M PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
SHANK STYLE: STANDARD TAPER W/TANG
TECHNICAL CHARACTERISTICS
CUTTING END STYLEGENERAL PURPOSE
TAPER SHANK SIZE DESIGNATOR5 MORSE
FLUTE LENGTH10.125 INCHES NOMINAL IN
OVERALL LENGTH17.125 INCHES NOMINAL IN
NOMINAL CUTTING DIAMETER1.8438 INCHES IN
CUTTING ROTATION DIRECTIONRIGHT-HAND
SPECIFICATION/STANDARD DATA05047-ASME B94.11M PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SHANK STYLESTANDARD TAPER W/TANG
FLUTE QUANTITY2
SPECIAL FEATURESTAPER SHANK LG; FRACTIONAL SIZE 1-27/32
SUBSTITUTES & CROSS-REFERENCES 8
C12347Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2410 1-27/32Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
53218Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
200 1-27/32Reference document
Same NSN cross-reference
Reference document — Secondary reference
1302Reference document
Same NSN cross-reference
Reference document — Secondary reference
110 1-27/32Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 12347?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12347?
12347 is a CIRCUIT CARD ASSEMBLY manufactured by Hama.
What parts can replace 12347?
There are 8 known substitutes for 12347: C12347, 2410 1-27/32, 53218 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 12347?
12347 is cataloged in the U.S. Government catalog under NSN 5133-00-228-1398. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12347