PartsTable
Technical Data Sheet
Download PDF

12341798 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

12341798: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 1.000 INCHES NOMINAL IN, length: 2.720 INCHES NOMINAL IN, material: STEEL OVERALL, loop_radius: 0.250 INCHES NOMINAL IN, material_thickness: 0.050 INCHES NOMINAL IN, distance_from_loop_center_to_end: 1.035 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-271-5866, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12341798
NSN: 5340-01-271-5866
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
width1.000 INCHES NOMINAL IN
length2.720 INCHES NOMINAL IN
materialSTEEL OVERALL
loop_radius0.250 INCHES NOMINAL IN
material_thickness0.050 INCHES NOMINAL IN
distance_from_loop_center_to_end1.035 INCHES NOMINAL IN
material_document_and_classificationASTM A684 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5340-01-271-5866
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12341798 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 2.720 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A684 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
LOOP RADIUS: 0.250 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.050 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO END: 1.035 INCHES NOMINAL IN
•
WIDTH: 1.000 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
LENGTH2.720 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A684 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
LOOP RADIUS0.250 INCHES NOMINAL IN
MATERIAL THICKNESS0.050 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO END1.035 INCHES NOMINAL IN
WIDTH1.000 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
A-18Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 12341798?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12341798?
12341798 is a CLIP,SPRING TENSION.
What parts can replace 12341798?
There is 1 known substitute for 12341798: A-18. Substitute compatibility should be verified for your specific system.
What is the NSN for 12341798?
12341798 is cataloged in the U.S. Government catalog under NSN 5340-01-271-5866. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12341798

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.