PartsTable
Technical Data Sheet
Download PDF

12340654 — BRACKET,DOUBLE ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

12340654: BRACKET,DOUBLE ANGLE.

The BRACKET,DOUBLE ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6010, first_leg_style: SQUARE, first_leg_width: 2.470 INCHES MINIMUM AND 2.530 INCHES MAXIMUM IN, second_leg_width: 2.470 INCHES MINIMUM AND 2.530 INCHES MAXIMUM IN, special_features: 1.440HOLE IN CENTER OF TOP WITH 4 EACH 0.218 INCH MOUNTING HOLES IN, mounting_hole_type: PLAIN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-476-6612, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12340654
NSN: 5340-01-476-6612
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 6010
first_leg_styleSQUARE
first_leg_width2.470 INCHES MINIMUM AND 2.530 INCHES MAXIMUM IN
second_leg_width2.470 INCHES MINIMUM AND 2.530 INCHES MAXIMUM IN
special_features1.440HOLE IN CENTER OF TOP WITH 4 EACH 0.218 INCH MOUNTING HOLES IN
mounting_hole_typePLAIN
end_item_identification2320-01-372-3932
first_leg_hole_diameter0.192 INCHES MINIMUM AND 0.196 INCHES MAXIMUM IN
second_leg_hole_diameter0.192 INCHES MINIMUM AND 0.196 INCHES MAXIMUM IN
first_leg_hole_arrangement_styleTWO HOLES
second_leg_relationship_to_first_legIDENTICAL
first_leg_distance_between_hole_centers_along_width1.750 INCHES NOMINAL IN
NSN5340-01-476-6612
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12340654 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.380 INCHES NOMINAL IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.380 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.192 INCHES MINIMUM AND 0.196 INCHES MAXIMUM IN
•
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH: 1.750 INCHES NOMINAL IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.192 INCHES MINIMUM AND 0.196 INCHES MAXIMUM IN
•
SECOND LEG WIDTH: 2.470 INCHES MINIMUM AND 2.530 INCHES MAXIMUM IN
•
FIRST LEG HOLE ARRANGEMENT STYLE: TWO HOLES
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.380 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.380 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER0.192 INCHES MINIMUM AND 0.196 INCHES MAXIMUM IN
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH1.750 INCHES NOMINAL IN
SECOND LEG RELATIONSHIP TO FIRST LEGIDENTICAL
SECOND LEG HOLE DIAMETER0.192 INCHES MINIMUM AND 0.196 INCHES MAXIMUM IN
SECOND LEG WIDTH2.470 INCHES MINIMUM AND 2.530 INCHES MAXIMUM IN
FIRST LEG HOLE ARRANGEMENT STYLETWO HOLES
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.620 INCHES NOMINAL IN
FIRST LEG STYLESQUARE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 12340654?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12340654?
12340654 is a BRACKET,DOUBLE ANGLE.
What is the NSN for 12340654?
12340654 is cataloged in the U.S. Government catalog under NSN 5340-01-476-6612. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12340654

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.