PartsTable
Technical Data Sheet
Download PDF

12340209 — PIN,GROOVED,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

12340209: PIN,GROOVED,HEADED.

The PIN,GROOVED,HEADED is a the manufacturer industrial component. Key specifications include height: 0.090 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN, diameter: 0.242 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN, material: STEEL OVERALL, head_style: BUTTON (RATIO OF HGTH/CRRG OVER 0.190 TO 0.300 INCLUSIVE), undercut_width: 0.039 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN, first_end_style: SQUARE. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-197-1494, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12340209
NSN: 5315-01-197-1494
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
height0.090 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
diameter0.242 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
materialSTEEL OVERALL
head_styleBUTTON (RATIO OF HGTH/CRRG OVER 0.190 TO 0.300 INCLUSIVE)
undercut_width0.039 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN
first_end_styleSQUARE
effective_length1.312 INCHES MINIMUM AND 1.326 INCHES MAXIMUM IN
style_designatorGROOVE
pin_head_diameter0.430 INCHES NOMINAL IN
under_head_length1.515 INCHES NOMINAL IN
undercut_diameter0.207 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN
first_hole_diameter0.087 INCHES MINIMUM AND 0.091 INCHES MAXIMUM IN
NSN5315-01-197-1494
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 12340209 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
UNDERCUT WIDTH: 0.039 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN
•
UNDERCUT DIAMETER: 0.207 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
UNDER HEAD LENGTH: 1.515 INCHES NOMINAL IN
•
FIRST END STYLE: SQUARE
•
FIRST HOLE DIAMETER: 0.087 INCHES MINIMUM AND 0.091 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: GROOVE
•
PIN HEAD DIAMETER: 0.430 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
UNDERCUT WIDTH0.039 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN
UNDERCUT DIAMETER0.207 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN
HOLE ARRANGEMENT STYLEONE END DRILLED
UNDER HEAD LENGTH1.515 INCHES NOMINAL IN
FIRST END STYLESQUARE
FIRST HOLE DIAMETER0.087 INCHES MINIMUM AND 0.091 INCHES MAXIMUM IN
STYLE DESIGNATORGROOVE
PIN HEAD DIAMETER0.430 INCHES NOMINAL IN
DIAMETER0.242 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
EFFECTIVE LENGTH1.312 INCHES MINIMUM AND 1.326 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 3
5581392Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5581392-BSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5315PL0819694Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 12340209?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12340209?
12340209 is a PIN,GROOVED,HEADED.
What parts can replace 12340209?
There are 3 known substitutes for 12340209: 5581392, 5581392-B, 5315PL0819694. Substitute compatibility should be verified for your specific system.
What is the NSN for 12340209?
12340209 is cataloged in the U.S. Government catalog under NSN 5315-01-197-1494. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12340209