PartsTable
Technical Data Sheet
Download PDF

12339608 — PLUG,PROTECTIVE,DUST AND MOISTUR

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

12339608: PLUG,PROTECTIVE,DUST AND MOISTUR.

PLUG,PROTECTIVE,DUST AND MOISTUR. Key specifications include material: PLASTIC, POLYETHYLENE (PP), design_type: FRICTION, overall_diameter: 0.750 INCHES NOMINAL IN, special_features: COLOR BLACK, features_provided: BEVELED SEAT, opening_inside_diameter_for_which_designed: 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-194-0888, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12339608
NSN: 5340-01-194-0888
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialPLASTIC, POLYETHYLENE (PP)
design_typeFRICTION
overall_diameter0.750 INCHES NOMINAL IN
special_featuresCOLOR BLACK
features_providedBEVELED SEAT
opening_inside_diameter_for_which_designed0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
NSN5340-01-194-0888
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12339608 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: FRICTION
•
OVERALL DIAMETER: 0.750 INCHES NOMINAL IN
•
FEATURES PROVIDED: BEVELED SEAT
•
OPENING INSIDE DIAMETER FOR WHICH DESIGNED: 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC, POLYETHYLENE (PP)
TECHNICAL CHARACTERISTICS
DESIGN TYPEFRICTION
OVERALL DIAMETER0.750 INCHES NOMINAL IN
FEATURES PROVIDEDBEVELED SEAT
OPENING INSIDE DIAMETER FOR WHICH DESIGNED0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
SPECIAL FEATURESCOLOR BLACK
MATERIALPLASTIC, POLYETHYLENE (PP)
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
5340PL0806364Reference document
Same NSN cross-reference
Reference document — Informative reference only
5583157Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 12339608?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12339608?
12339608 is a PLUG,PROTECTIVE,DUST AND MOISTUR.
What parts can replace 12339608?
There are 2 known substitutes for 12339608: 5340PL0806364, 5583157. Substitute compatibility should be verified for your specific system.
What is the NSN for 12339608?
12339608 is cataloged in the U.S. Government catalog under NSN 5340-01-194-0888. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12339608