PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 12339427
12339427 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLIP,RETAINING is a the manufacturer industrial component. Key specifications include material: STEEL, surface_treatment: PHOSPHATE, end_item_identification: 1430-01-531-2722, GUIDED MISSILE BATTERY CONTROL CENTRAL, VEHICLE MOUNTED (AMANPADS), part_name_assigned_by_controlling_agency: CLIP, RETAINING. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-211-5593, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12339427
NSN: 5340-01-211-5593
FSC: 5340
CAGE: 82484 — CVG SPRAGUE DEVICES, LLC DBA CVG SPRAGUE DEVICES, LLC (USA)
SPECIFICATIONS
materialSTEEL
special_featuresSPECIFIC MATERIAL IS SPRING STEEL, 0.018 INCHES THICK;OVERALL LENGTH IS 0.690 INCHES NOMINAL AND WIDTH IS 0.550 INCHES NOMINAL IN
surface_treatmentPHOSPHATE
end_item_identification1430-01-531-2722, GUIDED MISSILE BATTERY CONTROL CENTRAL, VEHICLE MOUNTED (AMANPADS)
part_name_assigned_by_controlling_agencyCLIP, RETAINING
NSN5340-01-211-5593
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12339427 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
LENGTH: 0.670 INCHES NOMINAL IN
•
WIDTH: 0.550 INCHES NOMINAL IN
•
SURFACE TREATMENT: PHOSPHATE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
LENGTH0.670 INCHES NOMINAL IN
WIDTH0.550 INCHES NOMINAL IN
SURFACE TREATMENTPHOSPHATE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
C1703Interchangeable
interchangeable cross-reference
interchangeable
14006Interchangeable
interchangeable cross-reference
interchangeable
12339427Interchangeable
interchangeable cross-reference
interchangeable
5340PL0820090Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 12339427?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12339427?
12339427 is a CLIP,RETAINING.
What parts can replace 12339427?
There are 4 known substitutes for 12339427: C1703, 14006, 12339427 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 12339427?
12339427 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-211-5593. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12339427

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026