PartsTable
Technical Data Sheet
Download PDF

12337224 — PAD,CUSHIONING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

12337224: PAD,CUSHIONING.

The PAD,CUSHIONING is a the manufacturer industrial component. Key specifications include width: 4.000 INCHES NOMINAL IN, length: 20.750 INCHES NOMINAL IN, material: RUBBER CHLOROPRENE CLASS CR CUSHIONING, thickness: 0.060 INCHES NOMINAL IN, special_features: EIGHT HOLES 0.187 DIA, material_document_and_classification: MIL-R-6855, CLASS 2, GRADE 40 MIL SPEC SINGLE MATERIAL RESPONSE CUSHIONING. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-281-8317, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12337224
NSN: 5340-01-281-8317
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
width4.000 INCHES NOMINAL IN
length20.750 INCHES NOMINAL IN
materialRUBBER CHLOROPRENE CLASS CR CUSHIONING
thickness0.060 INCHES NOMINAL IN
special_featuresEIGHT HOLES 0.187 DIA
material_document_and_classificationMIL-R-6855, CLASS 2, GRADE 40 MIL SPEC SINGLE MATERIAL RESPONSE CUSHIONING
NSN5340-01-281-8317
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12337224 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 20.750 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-6855, CLASS 2, GRADE 40 MIL SPEC SINGLE MATERIAL RESPONSE CUSHIONING
•
WIDTH: 4.000 INCHES NOMINAL IN
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR CUSHIONING
•
THICKNESS: 0.060 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
LENGTH20.750 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-6855, CLASS 2, GRADE 40 MIL SPEC SINGLE MATERIAL RESPONSE CUSHIONING
SPECIAL FEATURESEIGHT HOLES 0.187 DIA
WIDTH4.000 INCHES NOMINAL IN
MATERIALRUBBER CHLOROPRENE CLASS CR CUSHIONING
THICKNESS0.060 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 12337224?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12337224?
12337224 is a PAD,CUSHIONING.
What is the NSN for 12337224?
12337224 is cataloged in the U.S. Government catalog under NSN 5340-01-281-8317. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12337224