PartsTable
Technical Data Sheet
Download PDF

12336893 — WASHER,SEAL

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

12336893: WASHER,SEAL.

The WASHER,SEAL is a the manufacturer industrial component. Key specifications include hole_diameter: 0.251 INCHES MINIMUM AND 0.251 INCHES MINIMUM AND 0.255 INCHES MAXIMUM0.255 INCHES MAXIMUM IN, hardness_rating: 60.0 SHORE DUROMETER A MAXIMUM60.0 SHORE DUROMETER A MAXIMUM, recess_diameter: 0.430 INCHES NOMINAL0.430 INCHES NOMINAL IN, shoulder_height: 0.145 INCHES NOMINAL0.145 INCHES NOMINAL IN, outside_diameter: 0.940 INCHES NOMINAL0.940 INCHES NOMINAL IN, shoulder_diameter: 0.750 INCHES MINIMUM AND 0.750 INCHES MINIMUM AND 0.790 INCHES MAXIMUM0.790 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-322-5069, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12336893
NSN: 5310-01-322-5069
FSC: 5310 — Nuts and Washers
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
hole_diameter0.251 INCHES MINIMUM AND 0.251 INCHES MINIMUM AND 0.255 INCHES MAXIMUM0.255 INCHES MAXIMUM IN
hardness_rating60.0 SHORE DUROMETER A MAXIMUM60.0 SHORE DUROMETER A MAXIMUM
recess_diameter0.430 INCHES NOMINAL0.430 INCHES NOMINAL IN
shoulder_height0.145 INCHES NOMINAL0.145 INCHES NOMINAL IN
outside_diameter0.940 INCHES NOMINAL0.940 INCHES NOMINAL IN
shoulder_diameter0.750 INCHES MINIMUM AND 0.750 INCHES MINIMUM AND 0.790 INCHES MAXIMUM0.790 INCHES MAXIMUM IN
surface_treatmentCADMIUM OVERALL
material_document_and_classificationMIL-S-25043 MIL SPEC 1ST MATERIAL RESPONSE AND AMS 5643 ASSN STD 2ND MATERIAL RESPONSE AND ASTM D2000,-2BC510A14B14E014F17 ASSN STD 3RD MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-416,TY 1,CL 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-01-322-5069
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 12336893 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
SHOULDER HEIGHT: 0.145 INCHES NOMINAL0.145 INCHES NOMINAL IN
•
HARDNESS RATING: 60.0 SHORE DUROMETER A MAXIMUM60.0 SHORE DUROMETER A MAXIMUM
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-25043 MIL SPEC 1ST MATERIAL RESPONSE AND AMS 5643 ASSN STD 2ND MATERIAL RESPONSE AND ASTM D2000,-2BC510A14B14E014F17 ASSN STD 3RD MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 0.940 INCHES NOMINAL0.940 INCHES NOMINAL IN
•
SHOULDER DIAMETER: 0.750 INCHES MINIMUM AND 0.750 INCHES MINIMUM AND 0.790 INCHES MAXIMUM0.790 INCHES MAXIMUM IN
•
RECESS DIAMETER: 0.430 INCHES NOMINAL0.430 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OVERALL
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 1,CL 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SHOULDER HEIGHT0.145 INCHES NOMINAL0.145 INCHES NOMINAL IN
HARDNESS RATING60.0 SHORE DUROMETER A MAXIMUM60.0 SHORE DUROMETER A MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-25043 MIL SPEC 1ST MATERIAL RESPONSE AND AMS 5643 ASSN STD 2ND MATERIAL RESPONSE AND ASTM D2000,-2BC510A14B14E014F17 ASSN STD 3RD MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER0.940 INCHES NOMINAL0.940 INCHES NOMINAL IN
SHOULDER DIAMETER0.750 INCHES MINIMUM AND 0.750 INCHES MINIMUM AND 0.790 INCHES MAXIMUM0.790 INCHES MAXIMUM IN
RECESS DIAMETER0.430 INCHES NOMINAL0.430 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
HOLE DIAMETER0.251 INCHES MINIMUM AND 0.251 INCHES MINIMUM AND 0.255 INCHES MAXIMUM0.255 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 12336893?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12336893?
12336893 is a WASHER,SEAL.
What is the NSN for 12336893?
12336893 is cataloged in the U.S. Government catalog under NSN 5310-01-322-5069. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12336893

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.