PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 12335817
12335817 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER OVERALL, hole_diameter: 0.197 INCHES MINIMUM AND 0.207 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 1.735 INCHES MINIMUM AND 1.765 INCHES MAXIMUM IN, overall_length: 1.735 INCHES MINIMUM AND 1.765 INCHES MAXIMUM IN, style_designator: NON-CIRCULAR, aperture_diameter: 1.360 INCHES MINIMUM AND 1.390 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-271-1443, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12335817
NSN: 5330-01-271-1443
FSC: 5330
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialRUBBER OVERALL
hole_diameter0.197 INCHES MINIMUM AND 0.207 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width1.735 INCHES MINIMUM AND 1.765 INCHES MAXIMUM IN
overall_length1.735 INCHES MINIMUM AND 1.765 INCHES MAXIMUM IN
style_designatorNON-CIRCULAR
aperture_diameter1.360 INCHES MINIMUM AND 1.390 INCHES MAXIMUM IN
bolt_hole_quantity4
end_item_identification2330-01-303-5197 PLS TRAILER
cross-sectional_thickness0.058 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-01-271-1443
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12335817 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DIAMETER: 0.197 INCHES MINIMUM AND 0.207 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
•
APERTURE DIAMETER: 1.360 INCHES MINIMUM AND 1.390 INCHES MAXIMUM IN
•
MATERIAL: RUBBER OVERALL
•
STYLE DESIGNATOR: NON-CIRCULAR
•
BOLT HOLE QUANTITY: 4
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER0.197 INCHES MINIMUM AND 0.207 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
END ITEM IDENTIFICATION2330-01-303-5197 PLS TRAILER
OVERALL LENGTH1.735 INCHES MINIMUM AND 1.765 INCHES MAXIMUM IN
APERTURE DIAMETER1.360 INCHES MINIMUM AND 1.390 INCHES MAXIMUM IN
MATERIALRUBBER OVERALL
OVERALL WIDTH1.735 INCHES MINIMUM AND 1.765 INCHES MAXIMUM IN
STYLE DESIGNATORNON-CIRCULAR
BOLT HOLE QUANTITY4
CROSS-SECTIONAL THICKNESS0.058 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
1880355Interchangeable
interchangeable cross-reference
interchangeable
16957Interchangeable
interchangeable cross-reference
interchangeable
B-46965 PART 16957Interchangeable
interchangeable cross-reference
interchangeable
B-46965Interchangeable
interchangeable cross-reference
interchangeable
E-45502Interchangeable
interchangeable cross-reference
interchangeable
311.01.96Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 12335817?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12335817?
12335817 is a GASKET.
What parts can replace 12335817?
There are 7 known substitutes for 12335817: 1880355, 16957, B-46965 PART 16957 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 12335817?
12335817 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-271-1443. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12335817

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026