PartsTable
Technical Data Sheet
Download PDF

12335460 — COVER,ACCESS

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

12335460: COVER,ACCESS.

The COVER,ACCESS is a the manufacturer industrial component. Key specifications include width: 9.500 INCHES NOMINAL IN, length: 6.500 INCHES NOMINAL IN, material: ALUMINUM ALLOY 2014 OR ALUMINUM ALLOY 2219, securing_device_type: SPECIAL, peripheral_shape_style: RECTANGLE, FOUR HOLES, end_item_identification: FOR M9 ACE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-183-2777, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12335460
NSN: 5340-01-183-2777
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
width9.500 INCHES NOMINAL IN
length6.500 INCHES NOMINAL IN
materialALUMINUM ALLOY 2014 OR ALUMINUM ALLOY 2219
securing_device_typeSPECIAL
peripheral_shape_styleRECTANGLE, FOUR HOLES
end_item_identificationFOR M9 ACE
cross-sectional_shape_styleFLAT
distance_between_holes_along_width7.500 INCHES NOMINAL IN
distance_between_holes_along_length4.500 INCHES NOMINAL IN
material_document_and_classificationQQ=A=250/30 FED SPEC SINGLE MATERIAL RESPONSE OR ASTM-B209 NATIONAL SPEC SINGLE MATERIAL RESPONSE
distance_from_first_hole_centerline_to_end_along_width1.000 INCHES NOMINAL IN
distance_from_first_hole_centerline_to_end_along_length1.000 INCHES NOMINAL IN
NSN5340-01-183-2777
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12335460 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH: 1.000 INCHES NOMINAL IN
•
LENGTH: 6.500 INCHES NOMINAL IN
•
DISTANCE BETWEEN HOLES ALONG LENGTH: 4.500 INCHES NOMINAL IN
•
DISTANCE BETWEEN HOLES ALONG WIDTH: 7.500 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ=A=250/30 FED SPEC SINGLE MATERIAL RESPONSE OR ASTM-B209 NATIONAL SPEC SINGLE MATERIAL RESPONSE
•
CROSS-SECTIONAL SHAPE STYLE: FLAT
•
SECURING DEVICE TYPE: SPECIAL
•
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH: 1.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH1.000 INCHES NOMINAL IN
LENGTH6.500 INCHES NOMINAL IN
DISTANCE BETWEEN HOLES ALONG LENGTH4.500 INCHES NOMINAL IN
DISTANCE BETWEEN HOLES ALONG WIDTH7.500 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ=A=250/30 FED SPEC SINGLE MATERIAL RESPONSE OR ASTM-B209 NATIONAL SPEC SINGLE MATERIAL RESPONSE
CROSS-SECTIONAL SHAPE STYLEFLAT
SECURING DEVICE TYPESPECIAL
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH1.000 INCHES NOMINAL IN
PERIPHERAL SHAPE STYLERECTANGLE, FOUR HOLES
WIDTH9.500 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
13211E8950Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 12335460?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12335460?
12335460 is a COVER,ACCESS.
What parts can replace 12335460?
There is 1 known substitute for 12335460: 13211E8950. Substitute compatibility should be verified for your specific system.
What is the NSN for 12335460?
12335460 is cataloged in the U.S. Government catalog under NSN 5340-01-183-2777. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12335460