PartsTable
Technical Data Sheet
Download PDF

12333500 — COVER,ACCESS

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

12333500: COVER,ACCESS.

The COVER,ACCESS is a the manufacturer industrial component. Key specifications include width: 7.750 INCHES NOMINAL IN, length: 14.000 INCHES NOMINAL IN, material: ALUMINUM ALLOY 6061, body_thickness: 0.250 INCHES NOMINAL IN, peripheral_shape_style: RECTANGLE, MULTI HOLES, cross-sectional_shape_style: FLAT. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-201-1100, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12333500
NSN: 5340-01-201-1100
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
width7.750 INCHES NOMINAL IN
length14.000 INCHES NOMINAL IN
materialALUMINUM ALLOY 6061
body_thickness0.250 INCHES NOMINAL IN
peripheral_shape_styleRECTANGLE, MULTI HOLES
hole_quantity_along_width4
hole_quantity_along_length6
cross-sectional_shape_styleFLAT
distance_between_holes_along_width3.500 INCHES NOMINAL IN
distance_between_holes_along_length4.000 INCHES NOMINAL IN
distance_from_first_hole_centerline_to_end_along_width1.875 INCHES NOMINAL IN
distance_from_first_hole_centerline_to_end_along_length2.500 INCHES NOMINAL IN
NSN5340-01-201-1100
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12333500 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH: 1.875 INCHES NOMINAL IN
•
LENGTH: 14.000 INCHES NOMINAL IN
•
DISTANCE BETWEEN HOLES ALONG LENGTH: 4.000 INCHES NOMINAL IN
•
HOLE QUANTITY ALONG LENGTH: 6
•
DISTANCE BETWEEN HOLES ALONG WIDTH: 3.500 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: FLAT
•
HOLE QUANTITY ALONG WIDTH: 4
•
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH: 2.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH1.875 INCHES NOMINAL IN
LENGTH14.000 INCHES NOMINAL IN
DISTANCE BETWEEN HOLES ALONG LENGTH4.000 INCHES NOMINAL IN
HOLE QUANTITY ALONG LENGTH6
DISTANCE BETWEEN HOLES ALONG WIDTH3.500 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEFLAT
HOLE QUANTITY ALONG WIDTH4
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH2.500 INCHES NOMINAL IN
PERIPHERAL SHAPE STYLERECTANGLE, MULTI HOLES
WIDTH7.750 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
BML62428Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 12333500?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12333500?
12333500 is a COVER,ACCESS.
What parts can replace 12333500?
There is 1 known substitute for 12333500: BML62428. Substitute compatibility should be verified for your specific system.
What is the NSN for 12333500?
12333500 is cataloged in the U.S. Government catalog under NSN 5340-01-201-1100. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12333500