PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 12332698
12332698 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PLUNGER,QUICK RELEASE is a the manufacturer industrial component. Key specifications include shape: ROUND, thread_length: 0.750 INCHES NOMINAL IN, overall_length: 0.901 INCHES NOMINAL IN, nominal_thread_size: 0.500 INCHES IN, end_item_identification: 2350-01-110-4660, thread_quantity_per_inch: 13. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-191-8782, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12332698
NSN: 5340-01-191-8782
FSC: 5340
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
shapeROUND
thread_length0.750 INCHES NOMINAL IN
overall_length0.901 INCHES NOMINAL IN
nominal_thread_size0.500 INCHES IN
end_item_identification2350-01-110-4660
thread_quantity_per_inch13
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5340-01-191-8782
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12332698 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD QUANTITY PER INCH: 13
•
SHAPE: ROUND
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
NOMINAL THREAD SIZE: 0.500 INCHES IN
•
THREAD LENGTH: 0.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD QUANTITY PER INCH13
SHAPEROUND
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
END ITEM IDENTIFICATION2350-01-110-4660
OVERALL LENGTH0.901 INCHES NOMINAL IN
NOMINAL THREAD SIZE0.500 INCHES IN
THREAD LENGTH0.750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
2-4896Upgraded Successor
successor cross-reference
successor
M60Upgraded Successor
successor cross-reference
successor
2-3595Upgraded Successor
successor cross-reference
successor
MILT712AInterchangeable
interchangeable cross-reference
interchangeable
8358343Interchangeable
interchangeable cross-reference
interchangeable
80246Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 12332698?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12332698?
12332698 is a PLUNGER,QUICK RELEASE.
What parts can replace 12332698?
There are 14 known substitutes for 12332698: 2-4896, M60, 2-3595 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 12332698?
12332698 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-191-8782. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12332698

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026