PartsTable
Technical Data Sheet
Download PDF

12330229 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

12330229: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.310 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 8.000 INCHES NOMINAL IN, aperture_width: 6.000 INCHES NOMINAL IN, overall_length: 15.000 INCHES NOMINAL IN, aperture_length: 13.000 INCHES NOMINAL IN, hardness_rating: 55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-166-2632, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12330229
NSN: 5330-01-166-2632
FSC: 5330 — Packing and Gasket Materials
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
hole_diameter0.310 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width8.000 INCHES NOMINAL IN
aperture_width6.000 INCHES NOMINAL IN
overall_length15.000 INCHES NOMINAL IN
aperture_length13.000 INCHES NOMINAL IN
hardness_rating55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL
bolt_hole_quantity14
inside_corner_radius0.120 INCHES NOMINAL IN
outside_corner_radius0.250 INCHES NOMINAL IN
cross-sectional_thickness0.060 INCHES NOMINAL IN
outside_edge_to_bolt_hole_center_distance_along_width0.500 INCHES NOMINAL IN
outside_edge_to_bolt_hole_center_distance_along_length0.500 INCHES NOMINAL IN
NSN5330-01-166-2632
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12330229 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.060 INCHES NOMINAL IN
•
INSIDE CORNER RADIUS: 0.120 INCHES NOMINAL IN
•
HARDNESS RATING: 55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL
•
APERTURE WIDTH: 6.000 INCHES NOMINAL IN
•
APERTURE LENGTH: 13.000 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 14
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.060 INCHES NOMINAL IN
INSIDE CORNER RADIUS0.120 INCHES NOMINAL IN
HARDNESS RATING55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL
OVERALL LENGTH15.000 INCHES NOMINAL IN
OVERALL WIDTH8.000 INCHES NOMINAL IN
APERTURE WIDTH6.000 INCHES NOMINAL IN
APERTURE LENGTH13.000 INCHES NOMINAL IN
BOLT HOLE QUANTITY14
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH2.790 INCHES MINIMUM AND 2.810 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH3.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 1
BML64111Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 12330229?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12330229?
12330229 is a GASKET.
What parts can replace 12330229?
There is 1 known substitute for 12330229: BML64111. Substitute compatibility should be verified for your specific system.
What is the NSN for 12330229?
12330229 is cataloged in the U.S. Government catalog under NSN 5330-01-166-2632. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12330229

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.