The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 5083 OR ALUMINUM ALLOY 5086, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: CHAMFERED ENDS, first_leg_width: 3.000 INCHES NOMINAL IN, first_leg_length: 1.750 INCHES NOMINAL IN, second_leg_style: SQUARE. This part is cataloged in the U.S.
Government catalog under NSN 5340-01-189-6463, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
12325757
NSN:5340-01-189-6463 FSC:5340 — Hardware, Commercial CAGE:19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
material
ALUMINUM ALLOY 5083 OR ALUMINUM ALLOY 5086
first_leg_angle
90.0 DEGREES NOMINAL
first_leg_style
CHAMFERED ENDS
first_leg_width
3.000 INCHES NOMINAL IN
first_leg_length
1.750 INCHES NOMINAL IN
second_leg_style
SQUARE
second_leg_width
3.000 INCHES NOMINAL IN
special_features
4 HOLES,0.150 IN.DIA,ARE INCLUDED ON FIRST LEG,SURROUNDING MAIN HOLE IN
style_designator
ANGLE
second_leg_length
1.250 INCHES NOMINAL IN
surface_treatment
PHOSPHATE ZINC AND PLASTIC POLYURETHANE
mounting_hole_type
PLAIN
NSN
5340-01-189-6463
COMPONENT DIAGRAM
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.500 INCHES NOMINAL IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.660 INCHES MINIMUM AND 0.720 INCHES MAXIMUM IN
•
FIRST LEG HOLE DIAMETER: 1.062 INCHES MINIMUM AND 1.082 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.375 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-5541 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-C-46168 MIL SPEC 2ND TREATMENT RESPONSE
•
SECOND LEG WIDTH: 3.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
0.500 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
0.660 INCHES MINIMUM AND 0.720 INCHES MAXIMUM IN
FIRST LEG HOLE DIAMETER
1.062 INCHES MINIMUM AND 1.082 INCHES MAXIMUM IN
FIRST LEG ANGLE
90.0 DEGREES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEG
NOT IDENTICAL
SECOND LEG HOLE DIAMETER
0.375 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
MIL-C-5541 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-C-46168 MIL SPEC 2ND TREATMENT RESPONSE
SECOND LEG WIDTH
3.000 INCHES NOMINAL IN
SECOND LEG LENGTH
1.250 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLE
ONE HOLE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12325757?
12325757 is a BRACKET,ANGLE.
What is the NSN for 12325757?
12325757 is cataloged in the U.S. Government catalog under NSN 5340-01-189-6463. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.