PartsTable
Technical Data Sheet
Download PDF

12317066 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

12317066: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.250 INCHES NOMINAL IN, material: STEEL COMP 1020 OR STEEL COMP 1030 OVERALL, overall_width: 0.500 INCHES NOMINAL IN, style_designator: CENTER MOUNT, tongue_hole_type: ROUND, THREADED AND ROUND, UNTHREADED, surface_treatment: CADMIUM OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-174-9259, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12317066
NSN: 5340-01-174-9259
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
diameter0.250 INCHES NOMINAL IN
materialSTEEL COMP 1020 OR STEEL COMP 1030 OVERALL
overall_width0.500 INCHES NOMINAL IN
style_designatorCENTER MOUNT
tongue_hole_typeROUND, THREADED AND ROUND, UNTHREADED
surface_treatmentCADMIUM OVERALL
nominal_thread_size0.250 INCHES IN
loop_inside_diameter1.970 INCHES NOMINAL IN
end_item_identificationA4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE
thread_quantity_per_inch28
material_document_and_classificationMIL-S-22141 MIL SPEC SINGLE MATERIAL RESPONSE OR QQ-S-741 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
distance_from_loop_center_to_tongue_end1.815 INCHES NOMINAL IN
NSN5340-01-174-9259
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12317066 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE II,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
STYLE DESIGNATOR: CENTER MOUNT
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-22141 MIL SPEC SINGLE MATERIAL RESPONSE OR QQ-S-741 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
DIAMETER: 0.250 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.815 INCHES NOMINAL IN
•
NOMINAL THREAD SIZE: 0.250 INCHES IN
•
SURFACE TREATMENT: CADMIUM OVERALL
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE II,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
STYLE DESIGNATORCENTER MOUNT
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-22141 MIL SPEC SINGLE MATERIAL RESPONSE OR QQ-S-741 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
DIAMETER0.250 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.815 INCHES NOMINAL IN
NOMINAL THREAD SIZE0.250 INCHES IN
SURFACE TREATMENTCADMIUM OVERALL
END ITEM IDENTIFICATIONA4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE
THREAD QUANTITY PER INCH28
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 12317066?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12317066?
12317066 is a CLAMP,LOOP.
What is the NSN for 12317066?
12317066 is cataloged in the U.S. Government catalog under NSN 5340-01-174-9259. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12317066

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.