The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 2024, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_width: 2.250 INCHES NOMINAL IN, first_leg_length: 1.190 INCHES NOMINAL IN, second_leg_style: SQUARE, second_leg_width: 2.250 INCHES NOMINAL IN. This part is cataloged in the U.S.
Government catalog under NSN 5340-01-232-1532, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
12311909-2
NSN:5340-01-232-1532 FSC:5340 — Hardware, Commercial CAGE:19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
material
ALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 2024
first_leg_angle
90.0 DEGREES NOMINAL
first_leg_width
2.250 INCHES NOMINAL IN
first_leg_length
1.190 INCHES NOMINAL IN
second_leg_style
SQUARE
second_leg_width
2.250 INCHES NOMINAL IN
special_features
TWO SLOTS OPENED TO EDGE,ONE SLOT IS AT A 45 DEG ANGLE;STRAIGHT SLOT 0.568 IN.MIN AND 0.588 IN. MAX WIDE; OPPOSITE OF DASH 1 IN
style_designator
ANGLE
second_leg_length
2.000 INCHES NOMINAL IN
surface_treatment
ENAMEL SEMIGLOSS
mounting_hole_type
COUNTERSUNK
first_leg_thickness
0.125 INCHES NOMINAL IN
NSN
5340-01-232-1532
COMPONENT DIAGRAM
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.750 INCHES NOMINAL IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.233 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: TT-E529 TY 1 FED SPEC SINGLE TREATMENT RESPONSE OR TT-E-529 TY 2 FED SPEC SINGLE TREATMENT RESPONSE
•
SECOND LEG WIDTH: 2.250 INCHES NOMINAL IN
•
SECOND LEG LENGTH: 2.000 INCHES NOMINAL IN
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH: 0.530 INCHES MINIMUM AND 0.560 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
0.750 INCHES NOMINAL IN
FIRST LEG ANGLE
90.0 DEGREES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEG
NOT IDENTICAL
SECOND LEG HOLE DIAMETER
0.233 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
TT-E529 TY 1 FED SPEC SINGLE TREATMENT RESPONSE OR TT-E-529 TY 2 FED SPEC SINGLE TREATMENT RESPONSE
SECOND LEG WIDTH
2.250 INCHES NOMINAL IN
SECOND LEG LENGTH
2.000 INCHES NOMINAL IN
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
0.530 INCHES MINIMUM AND 0.560 INCHES MAXIMUM IN
STYLE DESIGNATOR
ANGLE
MATERIAL DOCUMENT AND CLASSIFICATION
QQ-A-200/8 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-200/3 FED SPEC 2ND MATERIAL RESPONSE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12311909-2?
12311909-2 is a BRACKET,ANGLE.
What is the NSN for 12311909-2?
12311909-2 is cataloged in the U.S. Government catalog under NSN 5340-01-232-1532. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.