The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL OR STEEL COMP 1026 OR STEEL COMP 1029 OR STEEL COMP 1030, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: SQUARE, first_leg_width: 5.970 INCHES MINIMUM AND 6.030 INCHES MAXIMUM IN, first_leg_length: 3.000 INCHES NOMINAL IN, second_leg_style: SQUARE. This part is cataloged in the U.S.
Government catalog under NSN 5340-01-218-7159, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
12303018
NSN:5340-01-218-7159 FSC:5340 — Hardware, Commercial CAGE:19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
material
STEEL OR STEEL COMP 1026 OR STEEL COMP 1029 OR STEEL COMP 1030
first_leg_angle
90.0 DEGREES NOMINAL
first_leg_style
SQUARE
first_leg_width
5.970 INCHES MINIMUM AND 6.030 INCHES MAXIMUM IN
first_leg_length
3.000 INCHES NOMINAL IN
second_leg_style
SQUARE
second_leg_width
5.970 INCHES MINIMUM AND 6.030 INCHES MAXIMUM IN
style_designator
ANGLE
second_leg_length
3.500 INCHES NOMINAL IN
surface_treatment
PRIMER EPOXY
mounting_hole_type
PLAIN
first_leg_thickness
0.437 INCHES NOMINAL IN
NSN
5340-01-218-7159
COMPONENT DIAGRAM
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.620 INCHES NOMINAL IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 1.250 INCHES NOMINAL IN
•
SECOND LEG DISTANCE BETWEEN UPPER HOLE CENTERS ALONG WIDTH: 4.000 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.687 INCHES MINIMUM AND 0.703 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH: 4.000 INCHES NOMINAL IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.531 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
0.620 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
1.250 INCHES NOMINAL IN
SECOND LEG DISTANCE BETWEEN UPPER HOLE CENTERS ALONG WIDTH
4.000 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER
0.687 INCHES MINIMUM AND 0.703 INCHES MAXIMUM IN
FIRST LEG ANGLE
90.0 DEGREES NOMINAL
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH
4.000 INCHES NOMINAL IN
SECOND LEG RELATIONSHIP TO FIRST LEG
NOT IDENTICAL
SECOND LEG HOLE DIAMETER
0.531 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
MIL-P-52192 MIL SPEC SINGLE TREATMENT RESPONSE OR MIL-P-53022 MIL SPEC SINGLE TREATMENT RESPONSE OR MIL-P-53030 MIL SPEC SINGLE TREATMENT RESPONSE
SECOND LEG WIDTH
5.970 INCHES MINIMUM AND 6.030 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12303018?
12303018 is a BRACKET,ANGLE.
What is the NSN for 12303018?
12303018 is cataloged in the U.S. Government catalog under NSN 5340-01-218-7159. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.