PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 123010
123010 ✓ Verified by PartsTable
Hama · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

- Form-fitting portfolio for safely storing the Tolino Vision and for protecting it from dirt and scratches<br>- Hand strap for easy handling when using the device for a longer period of time<br>- Magnetic fastener can be folded down and attaches the folded front to the back so that you only need to hold the hand strap when reading<br>- Openings for full access to connections and controls<br>- The eBook reader can remain in the case while being used<br>- The device can be inserted and removed easily This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-012-3010, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
123010
NSN: 5310-00-012-3010
FSC: 5310
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
nut_styleSLOTTED, HEXAGON
nut_height0.609 INCHES NOMINAL IN
thread_class3B
thread_seriesUNF
mounting_methodUNTHREADED HOLE(S)
overall_diameter0.875 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
features_providedSTERILE
width_across_flats0.875 INCHES NOMINAL IN
nominal_thread_size0.562 INCHES IN
bearing_surface_typeCHAMFERED OR WASHER FACED
NSN5310-00-012-3010
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 123010 · Hama ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.875 INCHES NOMINAL IN
•
THREAD SERIES: UNF
•
THREAD QUANTITY PER INCH: 18
•
BEARING SURFACE TYPE: CHAMFERED OR WASHER FACED
•
NOMINAL THREAD SIZE: 0.562 INCHES IN
•
NUT HEIGHT: 0.609 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633-CANC FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
WIDTH ACROSS FLATS0.875 INCHES NOMINAL IN
THREAD SERIESUNF
THREAD QUANTITY PER INCH18
BEARING SURFACE TYPECHAMFERED OR WASHER FACED
NOMINAL THREAD SIZE0.562 INCHES IN
NUT HEIGHT0.609 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633-CANC FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL OVERALL
THREAD DIRECTIONRIGHT-HAND
THREAD CLASS3B
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
73-0010Interchangeable
interchangeable cross-reference
interchangeable
371210Interchangeable
interchangeable cross-reference
interchangeable
1210Interchangeable
interchangeable cross-reference
interchangeable
123-010Interchangeable
interchangeable cross-reference
interchangeable
2-1671-5Interchangeable
interchangeable cross-reference
interchangeable
416-0024-001Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 123010?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 123010?
123010 is a WIRE ROPE ASSEMBLY,SINGLE LEG manufactured by Hama.
What parts can replace 123010?
There are 10 known substitutes for 123010: 73-0010, 371210, 1210 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 123010?
123010 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-012-3010. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 123010

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026