PartsTable
Technical Data Sheet
Download PDF

12300164 — BUSHING,SLEEVE

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

12300164: BUSHING,SLEEVE.

The BUSHING,SLEEVE is a the manufacturer industrial component. Key specifications include flange_width: 0.1150 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM IN, overall_length: 0.5400 INCHES NOMINAL IN, style_designator: SOLID, EXTERNAL FLANGE ONE END, body_inside_diameter: 0.5000 INCHES MINIMUM AND 0.5600 INCHES MAXIMUM IN, body_outside_diameter: 0.6100 INCHES MINIMUM AND 0.6200 INCHES MAXIMUM IN, end_item_identification: MULTIPLE LAUNCH ROCKET SYSTEM (MLRS). This part is cataloged in the U.S.

Government catalog under NSN 3120-01-115-3369, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12300164
NSN: 3120-01-115-3369
NIINs: 011153369, 011361170
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 94222 — SOUTHCO INC (USA)
SPECIFICATIONS
flange_width0.1150 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM IN
overall_length0.5400 INCHES NOMINAL IN
style_designatorSOLID, EXTERNAL FLANGE ONE END
body_inside_diameter0.5000 INCHES MINIMUM AND 0.5600 INCHES MAXIMUM IN
body_outside_diameter0.6100 INCHES MINIMUM AND 0.6200 INCHES MAXIMUM IN
end_item_identificationMULTIPLE LAUNCH ROCKET SYSTEM (MLRS)
flange_outside_diameter0.8750 INCHES NOMINAL IN
NSN3120-01-115-3369
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: 12300164 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SPLIT, EXTERNAL FLANGE
•
BODY INSIDE DIAMETER: 0.2300 INCHES MINIMUM AND 0.2400 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSPLIT, EXTERNAL FLANGE
OVERALL LENGTH0.7520 INCHES NOMINAL IN
BODY INSIDE DIAMETER0.2300 INCHES MINIMUM AND 0.2400 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 5
10085929Reference document
Same NSN cross-reference
Reference document — Informative reference only
WSI-B-6-AReference document
Same NSN cross-reference
Reference document — Design control — primary reference
12300164-2BC-10BSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2300164-BC-6ASame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
1200164-1BC-8DSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 12300164?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12300164?
12300164 is a BUSHING,SLEEVE.
What parts can replace 12300164?
There are 5 known substitutes for 12300164: 10085929, WSI-B-6-A, 12300164-2BC-10B and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 12300164?
12300164 is cataloged in the U.S. Government catalog under NSN 3120-01-115-3369. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12300164