PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 12300015-1
12300015-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

SEAL,NONMETALLIC SPECIAL SHAPED. Key specifications include material: RUBBER SYNTHETIC OVERALL, construction: SOLIDSOLID, style_designator: CIRCULAR, aperture_diameter: 1.500 INCHES NOMINAL1.500 INCHES NOMINAL IN, cross-sectional_width: 0.620 INCHES NOMINAL0.620 INCHES NOMINAL IN, cross-sectional_height: 1.060 INCHES NOMINAL1.060 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-108-9277, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12300015-1
NSN: 5330-01-108-9277
FSC: 5330
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
constructionSOLIDSOLID
style_designatorCIRCULAR
aperture_diameter1.500 INCHES NOMINAL1.500 INCHES NOMINAL IN
cross-sectional_width0.620 INCHES NOMINAL0.620 INCHES NOMINAL IN
cross-sectional_height1.060 INCHES NOMINAL1.060 INCHES NOMINAL IN
cross-sectional_thickness0.160 INCHES NOMINAL0.160 INCHES NOMINAL IN
cross-sectional_shape_styleSPECIALSPECIAL
NSN5330-01-108-9277
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12300015-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL WIDTH: 0.620 INCHES NOMINAL0.620 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
CROSS-SECTIONAL HEIGHT: 1.060 INCHES NOMINAL1.060 INCHES NOMINAL IN
•
TEST DATA DOCUMENT: 19207-12300015-1 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
•
CROSS-SECTIONAL SHAPE STYLE: SPECIALSPECIAL
•
APERTURE DIAMETER: 1.500 INCHES NOMINAL1.500 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
•
CROSS-SECTIONAL THICKNESS: 0.160 INCHES NOMINAL0.160 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL WIDTH0.620 INCHES NOMINAL0.620 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC OVERALL
CROSS-SECTIONAL HEIGHT1.060 INCHES NOMINAL1.060 INCHES NOMINAL IN
TEST DATA DOCUMENT19207-12300015-1 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
CROSS-SECTIONAL SHAPE STYLESPECIALSPECIAL
APERTURE DIAMETER1.500 INCHES NOMINAL1.500 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
CROSS-SECTIONAL THICKNESS0.160 INCHES NOMINAL0.160 INCHES NOMINAL IN
CONSTRUCTIONSOLIDSOLID
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
15221Interchangeable
interchangeable cross-reference
interchangeable
B94.9Interchangeable
interchangeable cross-reference
interchangeable
B94.9 5-44 UNF HS G H2Interchangeable
interchangeable cross-reference
interchangeable
514008Interchangeable
interchangeable cross-reference
interchangeable
1038-30101-10Interchangeable
interchangeable cross-reference
interchangeable
433739-6Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 12300015-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12300015-1?
12300015-1 is a SEAL,NONMETALLIC SPECIAL SHAPED.
What parts can replace 12300015-1?
There are 11 known substitutes for 12300015-1: 15221, B94.9, B94.9 5-44 UNF HS G H2 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 12300015-1?
12300015-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-108-9277. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12300015-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026