PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 12300015
12300015 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

SEAL,NONMETALLIC SPECIAL SHAPED. Key specifications include material: SILICONE OVERALL, construction: ONE-PIECEONE-PIECE, style_designator: CIRCULAR, aperture_diameter: 5.150 INCHES NOMINAL5.150 INCHES NOMINAL IN, cross-sectional_width: 0.620 INCHES NOMINAL0.620 INCHES NOMINAL IN, cross-sectional_height: 1.060 INCHES NOMINAL1.060 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-108-9276, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12300015
NSN: 5330-01-108-9276
FSC: 5330
CAGE: 5Z682 — CORRY RUBBER CORPORATION (USA)
SPECIFICATIONS
materialSILICONE OVERALL
constructionONE-PIECEONE-PIECE
style_designatorCIRCULAR
aperture_diameter5.150 INCHES NOMINAL5.150 INCHES NOMINAL IN
cross-sectional_width0.620 INCHES NOMINAL0.620 INCHES NOMINAL IN
cross-sectional_height1.060 INCHES NOMINAL1.060 INCHES NOMINAL IN
end_item_identification2350-01-091-54052350-01-091-5405
cross-sectional_thickness0.160 INCHES NOMINAL0.160 INCHES NOMINAL IN
cross-sectional_shape_styleSPECIALSPECIAL
NSN5330-01-108-9276
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12300015 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL WIDTH: 0.620 INCHES NOMINAL0.620 INCHES NOMINAL IN
•
APERTURE DIAMETER: 5.150 INCHES NOMINAL5.150 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: SPECIALSPECIAL
•
CROSS-SECTIONAL HEIGHT: 1.060 INCHES NOMINAL1.060 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.160 INCHES NOMINAL0.160 INCHES NOMINAL IN
•
CONSTRUCTION: ONE-PIECEONE-PIECE
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL WIDTH0.620 INCHES NOMINAL0.620 INCHES NOMINAL IN
APERTURE DIAMETER5.150 INCHES NOMINAL5.150 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
CROSS-SECTIONAL SHAPE STYLESPECIALSPECIAL
CROSS-SECTIONAL HEIGHT1.060 INCHES NOMINAL1.060 INCHES NOMINAL IN
END ITEM IDENTIFICATION2350-01-091-54052350-01-091-5405
CROSS-SECTIONAL THICKNESS0.160 INCHES NOMINAL0.160 INCHES NOMINAL IN
CONSTRUCTIONONE-PIECEONE-PIECE
MATERIALSILICONE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
2600Interchangeable
interchangeable cross-reference
interchangeable
1117-2Interchangeable
interchangeable cross-reference
interchangeable
15220Interchangeable
interchangeable cross-reference
interchangeable
B94.9 5-44 UNF HS G H2Interchangeable
interchangeable cross-reference
interchangeable
C54192Interchangeable
interchangeable cross-reference
interchangeable
PNS212-3PC3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 12300015?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12300015?
12300015 is a SEAL,NONMETALLIC SPECIAL SHAPED.
What parts can replace 12300015?
There are 12 known substitutes for 12300015: 2600, 1117-2, 15220 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 12300015?
12300015 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-108-9276. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12300015

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026