123-EB-24 — SWITCH,ROTARY

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

123-EB-24: SWITCH,ROTARY.

The SWITCH,ROTARY is a the manufacturer industrial component. Key specifications include shaft_type: ROUND SINGLE ACTUATOR, shaft_length: 1.125 INCHES NOMINAL SINGLE ACTUATOR IN, thread_class: 2B SINGLE MOUNTING FACILITY, overall_width: 2.634 INCHES MINIMUM AND 2.766 INCHES MAXIMUM IN, pole_quantity: 2 SINGLE SECTION REAR, terminal_type: TAB, SOLDER LUG. This part is cataloged in the U.S.

Government catalog under NSN 5930-00-086-9242, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 123-EB-24

NSN: 5930-00-086-9242
FSC: 5930 — Switches
CAGE: 28057 — SHALLCO, INC (USA)

SPECIFICATIONS

shaft_type	ROUND SINGLE ACTUATOR
shaft_length	1.125 INCHES NOMINAL SINGLE ACTUATOR IN
thread_class	2B SINGLE MOUNTING FACILITY
overall_width	2.634 INCHES MINIMUM AND 2.766 INCHES MAXIMUM IN
pole_quantity	2 SINGLE SECTION REAR
terminal_type	TAB, SOLDER LUG
overall_height	2.634 INCHES MINIMUM AND 2.766 INCHES MAXIMUM IN
overall_length	2.507 INCHES MINIMUM AND 2.609 INCHES MAXIMUM IN
shaft_diameter	0.250 INCHES NOMINAL SINGLE ACTUATOR IN
throw_quantity	24 SINGLE SECTION REAR
mounting_method	BASE SINGLE MOUNTING FACILITY
style_designator	TAP, SQUARE FRAME
NSN	5930-00-086-9242

COMPONENT DIAGRAM

KEY FEATURES

•

SHAFT TYPE: ROUND SINGLE ACTUATOR

•

SHAFT DIAMETER: 0.250 INCHES NOMINAL SINGLE ACTUATOR IN

•

SWITCH CONTACT BASIC DESIGN: NONPILE-UP SYMMETRICAL

•

TERMINAL TYPE: TAB, SOLDER LUG

•

MOUNTING FACILITY PATTERN: TWO POSITION IN-LINE SINGLE MOUNTING FACILITY

•

CONTACT LOAD CURRENT RATING: 200.0 MILLIAMPERES RESISTIVE LOAD DC AT SEA LEVEL

•

MOUNTING METHOD: BASE SINGLE MOUNTING FACILITY

TECHNICAL CHARACTERISTICS

SHAFT TYPE	ROUND SINGLE ACTUATOR
OVERALL HEIGHT	2.634 INCHES MINIMUM AND 2.766 INCHES MAXIMUM IN
SHAFT DIAMETER	0.250 INCHES NOMINAL SINGLE ACTUATOR IN
SWITCH CONTACT BASIC DESIGN	NONPILE-UP SYMMETRICAL
TERMINAL TYPE	TAB, SOLDER LUG
MOUNTING FACILITY PATTERN	TWO POSITION IN-LINE SINGLE MOUNTING FACILITY
CONTACT LOAD CURRENT RATING	200.0 MILLIAMPERES RESISTIVE LOAD DC AT SEA LEVEL
MOUNTING METHOD	BASE SINGLE MOUNTING FACILITY
POLE QUANTITY	2 SINGLE SECTION REAR
STYLE DESIGNATOR	TAP, SQUARE FRAME

SUBSTITUTES & CROSS-REFERENCES 4

9457Reference document

Same NSN cross-reference

Reference document — Secondary reference

2181705-1Reference document

Same NSN cross-reference

Reference document — Secondary reference

123-EB-24 MOD (SPEC 94S7)Reference document

Same NSN cross-reference

Reference document — Secondary reference

SPEC 9457Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required

Ready to buy 123-EB-24?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 123-EB-24?

123-EB-24 is a SWITCH,ROTARY. It is classified as a MRO (MRO_GENERAL).

What parts can replace 123-EB-24?

There are 4 known substitutes for 123-EB-24: 9457, 2181705-1, 123-EB-24 MOD (SPEC 94S7) and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 123-EB-24?

123-EB-24 is cataloged in the U.S. Government catalog under NSN 5930-00-086-9242. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

123-EB-24 — SWITCH,ROTARY

Request a Quote — 123-EB-24