PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 123-95
123-95 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

CAPACITOR,FIXED,PLASTIC DIELECTR. Key specifications include material: ALUMINUM OVERALL, thickness: 0.031 INCHES MINIMUM AND 0.041 INCHES MAXIMUM IN, bore_style: PLAIN BOTH ENDS, body_height: 0.165 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN, pitch_radius: 0.6090 INCHES NOMINAL IN, hole_diameter: 0.495 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-171-7106, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
123-95
NSN: 5310-00-171-7106
FSC: 5310
CAGE: 84760 — STANADYNE CORPORATION DBA STANADYNE DIESEL SYSTEMS DIV DIESEL SYSTEMS (USA)
SPECIFICATIONS
materialALUMINUM OVERALL
thickness0.031 INCHES MINIMUM AND 0.041 INCHES MAXIMUM IN
bore_stylePLAIN BOTH ENDS
body_height0.165 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN
pitch_radius0.6090 INCHES NOMINAL IN
hole_diameter0.495 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
blade_quantity12
pressure_angle14.5000 DEGREES
teeth_quantity36
hardness_rating55.0 SHORE DUROMETER A MINIMUM AND 60.0 SHORE DUROMETER A MAXIMUM
overall_diameter0.760 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN
special_featuresCATERPILLAR BRUSH LIGHT SEAL; REPAIR PART FOR COMPUTED RADIOGRAPHY READER, 6525-01-564-5639
NSN5310-00-171-7106
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 123-95 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-P-5315 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
HOLE DIAMETER: 0.495 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
CENTER HOLE SHAPE STYLE: ROUND
•
HARDNESS RATING: 55.0 SHORE DUROMETER A MINIMUM AND 60.0 SHORE DUROMETER A MAXIMUM
•
OVERALL DIAMETER: 0.760 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN
•
PERIPHERAL SHAPE STYLE: ROUND
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-P-5315 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALRUBBER SYNTHETIC OVERALL
HOLE DIAMETER0.495 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
CENTER HOLE SHAPE STYLEROUND
HARDNESS RATING55.0 SHORE DUROMETER A MINIMUM AND 60.0 SHORE DUROMETER A MAXIMUM
OVERALL DIAMETER0.760 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN
PERIPHERAL SHAPE STYLEROUND
THICKNESS0.031 INCHES MINIMUM AND 0.041 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
123-8Interchangeable
interchangeable cross-reference
interchangeable
B83B0033-22Interchangeable
interchangeable cross-reference
interchangeable
123-169Interchangeable
interchangeable cross-reference
interchangeable
11690Interchangeable
interchangeable cross-reference
interchangeable
LM302HInterchangeable
interchangeable cross-reference
interchangeable
12395Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 123-95?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 123-95?
123-95 is a CAPACITOR,FIXED,PLASTIC DIELECTR.
What parts can replace 123-95?
There are 10 known substitutes for 123-95: 123-8, B83B0033-22, 123-169 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 123-95?
123-95 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-171-7106. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 123-95

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026