PartsTable
Technical Data Sheet
Download PDF

123-3232-F — CLAMP,INSTRUMENT MOUNTING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

123-3232-F: CLAMP,INSTRUMENT MOUNTING.

The CLAMP,INSTRUMENT MOUNTING is a the manufacturer industrial component. Key specifications include height: 1.500 INCHES NOMINAL IN, material: ALUMINUM ALLOY 2024, inside_length: 3.175 INCHES NOMINAL IN, special_features: 2JACKING SCREW SIZE 8-32 AND 2 MOUNTING SCREW SIZE 6-32, style_designator: SQUARE, center_to_center_distance_between_holes: 3.885 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-393-0654, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
123-3232-F
NSN: 5340-01-393-0654
FSC: 5340 — Hardware, Commercial
CAGE: 28277 — DEXTER-WILSON CORP (USA)
SPECIFICATIONS
height1.500 INCHES NOMINAL IN
materialALUMINUM ALLOY 2024
inside_length3.175 INCHES NOMINAL IN
special_features2JACKING SCREW SIZE 8-32 AND 2 MOUNTING SCREW SIZE 6-32
style_designatorSQUARE
center_to_center_distance_between_holes3.885 INCHES NOMINAL IN
center_to_center_distance_between_mounting_holes3.885 INCHES NOMINAL IN
NSN5340-01-393-0654
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 123-3232-F MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INSIDE LENGTH: 3.175 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES: 3.885 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SQUARE
•
CENTER TO CENTER DISTANCE BETWEEN HOLES: 3.885 INCHES NOMINAL IN
•
HEIGHT: 1.500 INCHES NOMINAL IN
•
MATERIAL: ALUMINUM ALLOY 2024
TECHNICAL CHARACTERISTICS
INSIDE LENGTH3.175 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES3.885 INCHES NOMINAL IN
STYLE DESIGNATORSQUARE
CENTER TO CENTER DISTANCE BETWEEN HOLES3.885 INCHES NOMINAL IN
HEIGHT1.500 INCHES NOMINAL IN
SPECIAL FEATURES2JACKING SCREW SIZE 8-32 AND 2 MOUNTING SCREW SIZE 6-32
MATERIALALUMINUM ALLOY 2024
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 123-3232-F?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 123-3232-F?
123-3232-F is a CLAMP,INSTRUMENT MOUNTING.
What is the NSN for 123-3232-F?
123-3232-F is cataloged in the U.S. Government catalog under NSN 5340-01-393-0654. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 123-3232-F