PartsTable
Technical Data Sheet
Download PDF

1229A339 — LOCKING PLATE,NUT AND BOLT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1229A339: LOCKING PLATE,NUT AND BOLT.

The LOCKING PLATE,NUT AND BOLT is a the manufacturer industrial component. Key specifications include width: 1.375 INCHES NOMINAL IN, material: STEEL COMP 1020, style_designator: STRAIGHT, fsc_application_data: VEHICULAR,BRAKE, mounting_hole_diameter: 0.906 INCHES NOMINAL IN, cross-sectional_shape_style: FLAT. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-515-5862, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1229A339
NSN: 5340-00-515-5862
FSC: 5340 — Hardware, Commercial
CAGE: 62508 — UTILITY TRAILER MFG CO (USA)
SPECIFICATIONS
width1.375 INCHES NOMINAL IN
materialSTEEL COMP 1020
style_designatorSTRAIGHT
fsc_application_dataVEHICULAR,BRAKE
mounting_hole_diameter0.906 INCHES NOMINAL IN
mounting_hole_quantity2
cross-sectional_shape_styleFLAT
material_document_and_classificationAISI C1020 ASSN STD 1ST MATERIAL RESPONSE AND SAE 1020 ASSN STD 2ND MATERIAL RESPONSE
distance_between_mounting_hole_centers2.500 INCHES NOMINAL IN
NSN5340-00-515-5862
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1229A339 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 2
•
FSC APPLICATION DATA: VEHICULAR,BRAKE
•
DISTANCE BETWEEN MOUNTING HOLE CENTERS: 2.500 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI C1020 ASSN STD 1ST MATERIAL RESPONSE AND SAE 1020 ASSN STD 2ND MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 0.906 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: FLAT
•
WIDTH: 1.375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY2
FSC APPLICATION DATAVEHICULAR,BRAKE
DISTANCE BETWEEN MOUNTING HOLE CENTERS2.500 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT
MATERIAL DOCUMENT AND CLASSIFICATIONAISI C1020 ASSN STD 1ST MATERIAL RESPONSE AND SAE 1020 ASSN STD 2ND MATERIAL RESPONSE
MOUNTING HOLE DIAMETER0.906 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEFLAT
WIDTH1.375 INCHES NOMINAL IN
MATERIALSTEEL COMP 1020
SUBSTITUTES & CROSS-REFERENCES 1
5155862Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 1229A339?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1229A339?
1229A339 is a LOCKING PLATE,NUT AND BOLT.
What parts can replace 1229A339?
There is 1 known substitute for 1229A339: 5155862. Substitute compatibility should be verified for your specific system.
What is the NSN for 1229A339?
1229A339 is cataloged in the U.S. Government catalog under NSN 5340-00-515-5862. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1229A339