PartsTable
Technical Data Sheet
Download PDF

12298876C — STRIKE,CATCH

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

12298876C: STRIKE,CATCH.

The STRIKE,CATCH is a the manufacturer industrial component. Key specifications include diameter: 0.440 INCHES NOMINAL IN, material: UNABLE TO DECODE, tongue_width: 1.000 INCHES NOMINAL IN, overall_width: 0.750 INCHES NOMINAL IN, overall_length: 2.160 INCHES NOMINAL IN, material_thickness: 0.380 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-154-9987, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12298876C
NSN: 5340-01-154-9987
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
diameter0.440 INCHES NOMINAL IN
materialUNABLE TO DECODE
tongue_width1.000 INCHES NOMINAL IN
overall_width0.750 INCHES NOMINAL IN
overall_length2.160 INCHES NOMINAL IN
material_thickness0.380 INCHES NOMINAL IN
first_surface_hole_size0.257 INCHES NOMINAL IN
NSN5340-01-154-9987
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12298876C MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TONGUE WIDTH: 1.000 INCHES NOMINAL IN
•
DIAMETER: 0.440 INCHES NOMINAL IN
•
FIRST SURFACE HOLE SIZE: 0.257 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.380 INCHES NOMINAL IN
•
MATERIAL: UNABLE TO DECODE
TECHNICAL CHARACTERISTICS
TONGUE WIDTH1.000 INCHES NOMINAL IN
DIAMETER0.440 INCHES NOMINAL IN
OVERALL LENGTH2.160 INCHES NOMINAL IN
OVERALL WIDTH0.750 INCHES NOMINAL IN
FIRST SURFACE HOLE SIZE0.257 INCHES NOMINAL IN
MATERIAL THICKNESS0.380 INCHES NOMINAL IN
MATERIALUNABLE TO DECODE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
12298876Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 12298876C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12298876C?
12298876C is a STRIKE,CATCH.
What parts can replace 12298876C?
There is 1 known substitute for 12298876C: 12298876. Substitute compatibility should be verified for your specific system.
What is the NSN for 12298876C?
12298876C is cataloged in the U.S. Government catalog under NSN 5340-01-154-9987. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12298876C