PartsTable
Technical Data Sheet
Download PDF

12296702 — SEAL,NONMETALLIC SPECIAL SHAPED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

12296702: SEAL,NONMETALLIC SPECIAL SHAPED.

SEAL,NONMETALLIC SPECIAL SHAPED. Key specifications include material: RUBBER OVERALL, construction: SOLIDSOLID, aperture_width: 21.960 INCHES MINIMUM AND 21.960 INCHES MINIMUM AND 22.160 INCHES MAXIMUM22.160 INCHES MAXIMUM IN, aperture_length: 38.800 INCHES MINIMUM AND 38.800 INCHES MINIMUM AND 39.000 INCHES MAXIMUM39.000 INCHES MAXIMUM IN, style_designator: OVAL, end_item_identification: ARMORED MULTI-PURPOSE VEHICLE (AMPV)ARMORED MULTI-PURPOSE VEHICLE (AMPV). This part is cataloged in the U.S.

Government catalog under NSN 5330-01-124-9314, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12296702
NSN: 5330-01-124-9314
FSC: 5330 — Packing and Gasket Materials
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialRUBBER OVERALL
constructionSOLIDSOLID
aperture_width21.960 INCHES MINIMUM AND 21.960 INCHES MINIMUM AND 22.160 INCHES MAXIMUM22.160 INCHES MAXIMUM IN
aperture_length38.800 INCHES MINIMUM AND 38.800 INCHES MINIMUM AND 39.000 INCHES MAXIMUM39.000 INCHES MAXIMUM IN
style_designatorOVAL
end_item_identificationARMORED MULTI-PURPOSE VEHICLE (AMPV)ARMORED MULTI-PURPOSE VEHICLE (AMPV)
NSN5330-01-124-9314
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12296702 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: OVAL
•
APERTURE WIDTH: 21.960 INCHES MINIMUM AND 21.960 INCHES MINIMUM AND 22.160 INCHES MAXIMUM22.160 INCHES MAXIMUM IN
•
APERTURE LENGTH: 38.800 INCHES MINIMUM AND 38.800 INCHES MINIMUM AND 39.000 INCHES MAXIMUM39.000 INCHES MAXIMUM IN
•
MATERIAL: RUBBER OVERALL
•
CONSTRUCTION: SOLIDSOLID
TECHNICAL CHARACTERISTICS
STYLE DESIGNATOROVAL
APERTURE WIDTH21.960 INCHES MINIMUM AND 21.960 INCHES MINIMUM AND 22.160 INCHES MAXIMUM22.160 INCHES MAXIMUM IN
APERTURE LENGTH38.800 INCHES MINIMUM AND 38.800 INCHES MINIMUM AND 39.000 INCHES MAXIMUM39.000 INCHES MAXIMUM IN
END ITEM IDENTIFICATIONARMORED MULTI-PURPOSE VEHICLE (AMPV)ARMORED MULTI-PURPOSE VEHICLE (AMPV)
MATERIALRUBBER OVERALL
CONSTRUCTIONSOLIDSOLID
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 12296702?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12296702?
12296702 is a SEAL,NONMETALLIC SPECIAL SHAPED.
What is the NSN for 12296702?
12296702 is cataloged in the U.S. Government catalog under NSN 5330-01-124-9314. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12296702