PartsTable
Technical Data Sheet
Download PDF

122897-3-8 — BOLT,SHEAR

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

122897-3-8: BOLT,SHEAR.

The BOLT,SHEAR is a the manufacturer industrial component. Key specifications include material: STEEL COMP XM-13 OVERALL, head_style: SPLINE EXTENDED WASHER, grip_length: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, head_height: 0.195 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5306-01-259-6341, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
122897-3-8
NSN: 5306-01-259-6341
FSC: 5306 — Bolts
CAGE: 80539 — SPS TECHNOLOGIES, LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA (USA)
SPECIFICATIONS
materialSTEEL COMP XM-13 OVERALL
head_styleSPLINE EXTENDED WASHER
grip_length0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
head_height0.195 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN
thread_length0.374 INCHES MINIMUM AND 0.424 INCHES MAXIMUM IN
fastener_length0.884 INCHES MINIMUM AND 0.914 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
head_minor_diameter0.235 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
nominal_thread_diameter0.190 INCHES IN
NSN5306-01-259-6341
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 122897-3-8 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
EXTENDED WASHER THICKNESS: 0.017 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
•
HEAD HEIGHT: 0.195 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.884 INCHES MINIMUM AND 0.914 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
EXTENDED WASHER DIAMETER: 0.349 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.374 INCHES MINIMUM AND 0.424 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
TECHNICAL CHARACTERISTICS
EXTENDED WASHER THICKNESS0.017 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
HEAD HEIGHT0.195 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
FASTENER LENGTH0.884 INCHES MINIMUM AND 0.914 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
EXTENDED WASHER DIAMETER0.349 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN
THREAD LENGTH0.374 INCHES MINIMUM AND 0.424 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLESPLINE EXTENDED WASHER
THREAD DIRECTIONRIGHT-HAND
SUBSTITUTES & CROSS-REFERENCES 6
ST3M753-3-8Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MB156-3-8Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
S343-3-8Reference document
Same NSN cross-reference
Reference document — Secondary reference
VFK600-3-8Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
VS3190-3-8Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
PBF1267-3-8Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 122897-3-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 122897-3-8?
122897-3-8 is a BOLT,SHEAR.
What parts can replace 122897-3-8?
There are 6 known substitutes for 122897-3-8: ST3M753-3-8, MB156-3-8, S343-3-8 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 122897-3-8?
122897-3-8 is cataloged in the U.S. Government catalog under NSN 5306-01-259-6341. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 122897-3-8

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.