PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 12286801
12286801 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.740 INCHES MINIMUM AND 0.746 INCHES MAXIMUM IN, sealing_element_style: ANGULAR-OPPOSED, accommodated_shaft_diameter: 1.663 INCHES MINIMUM AND 1.664 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-074-4965, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12286801
NSN: 5330-01-074-4965
FSC: 5330
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.740 INCHES MINIMUM AND 0.746 INCHES MAXIMUM IN
sealing_element_styleANGULAR-OPPOSED
accommodated_shaft_diameter1.663 INCHES MINIMUM AND 1.664 INCHES MAXIMUM IN
NSN5330-01-074-4965
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12286801 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 1.663 INCHES MINIMUM AND 1.664 INCHES MAXIMUM IN
•
SEAL WIDTH: 0.740 INCHES MINIMUM AND 0.746 INCHES MAXIMUM IN
•
MATERIAL: CARBON SEALING ELEMENT A
•
SEALING ELEMENT STYLE: ANGULAR-OPPOSED
TECHNICAL CHARACTERISTICS (FLIS)
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER1.663 INCHES MINIMUM AND 1.664 INCHES MAXIMUM IN
SEAL WIDTH0.740 INCHES MINIMUM AND 0.746 INCHES MAXIMUM IN
MATERIALCARBON SEALING ELEMENT A
MATERIALCARBON SEALING ELEMENT B
MATERIALSTEEL CASE
SEALING ELEMENT STYLEANGULAR-OPPOSED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
10-80199-1Interchangeable
interchangeable cross-reference
interchangeable
10-161470-1Interchangeable
interchangeable cross-reference
interchangeable
35674002-1001Interchangeable
interchangeable cross-reference
interchangeable
974020-0421Interchangeable
interchangeable cross-reference
interchangeable
S161-54LS02Interchangeable
interchangeable cross-reference
interchangeable
59095Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 12286801?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12286801?
12286801 is a SEAL,PLAIN ENCASED.
What parts can replace 12286801?
There are 8 known substitutes for 12286801: 10-80199-1, 10-161470-1, 35674002-1001 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 12286801?
12286801 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-074-4965. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12286801

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026