PartsTable
Technical Data Sheet
Download PDF

12283437 — PIN,STRAIGHT,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

12283437: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.090 INCHES NOMINAL IN, diameter: 0.185 INCHES MINIMUM AND 0.189 INCHES MAXIMUM IN, material: STEEL COMP 8620 OVERALL, head_style: FLAT CHAMFER, chamfer_length: 0.030 INCHES NOMINAL IN, style_designator: STRAIGHT. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-128-1354, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12283437
NSN: 5315-01-128-1354
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
height0.090 INCHES NOMINAL IN
diameter0.185 INCHES MINIMUM AND 0.189 INCHES MAXIMUM IN
materialSTEEL COMP 8620 OVERALL
head_styleFLAT CHAMFER
chamfer_length0.030 INCHES NOMINAL IN
style_designatorSTRAIGHT
pin_chamfer_angle45.0 DEGREES NOMINAL
pin_head_diameter0.400 INCHES NOMINAL IN
under_head_length0.410 INCHES NOMINAL IN
material_document_and_classificationMIL-S-8690 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5315-01-128-1354
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 12283437 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.030 INCHES NOMINAL IN
•
UNDER HEAD LENGTH: 0.410 INCHES NOMINAL IN
•
PIN CHAMFER ANGLE: 45.0 DEGREES NOMINAL
•
STYLE DESIGNATOR: STRAIGHT
•
PIN HEAD DIAMETER: 0.400 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-8690 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
DIAMETER: 0.185 INCHES MINIMUM AND 0.189 INCHES MAXIMUM IN
•
HEAD STYLE: FLAT CHAMFER
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH0.030 INCHES NOMINAL IN
UNDER HEAD LENGTH0.410 INCHES NOMINAL IN
PIN CHAMFER ANGLE45.0 DEGREES NOMINAL
STYLE DESIGNATORSTRAIGHT
PIN HEAD DIAMETER0.400 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-8690 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
DIAMETER0.185 INCHES MINIMUM AND 0.189 INCHES MAXIMUM IN
HEAD STYLEFLAT CHAMFER
HEIGHT0.090 INCHES NOMINAL IN
MATERIALSTEEL COMP 8620 OVERALL
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 12283437?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12283437?
12283437 is a PIN,STRAIGHT,HEADED.
What is the NSN for 12283437?
12283437 is cataloged in the U.S. Government catalog under NSN 5315-01-128-1354. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12283437

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.