PartsTable
Technical Data Sheet
PartsTable / MRO / 1228-7
1228-7 ✓ Verified by PartsTable
Jumbo · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PAD LOCKING is a Jumbo industrial component. Key specifications include width: 1.845 INCHES NOMINAL IN, length: 80.0 MILLIMETERS NOMINAL MM, material: PLASTIC OVERALL, hole_diameter: 0.171 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN, body_thickness: 0.062 INCHES NOMINAL IN, special_features: FLEXIBLE; OPAQUE; USED TO HELP REDUCE TISSUE TRAUMA. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-360-2224, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 1228-7
NSN: 5340-00-360-2224
FSC: 5340
CAGE: 99643 — EATON AEROSPACE LLC DBA EATON AEROSPACE JACKSON (USA)
SPECIFICATIONS
width1.845 INCHES NOMINAL IN
length80.0 MILLIMETERS NOMINAL MM
materialPLASTIC OVERALL
hole_diameter0.171 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN
body_thickness0.062 INCHES NOMINAL IN
special_featuresFLEXIBLE; OPAQUE; USED TO HELP REDUCE TISSUE TRAUMA
features_providedDISPOSABLE
surface_treatmentANODIZE
design_designationGUEDEL
securing_device_typeTHREADED FASTENER
unit_package_quantity14
peripheral_shape_styleRECTANGLE, FOUR HOLES
NSN5340-00-360-2224
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1228-7 MFR: Jumbo ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PERIPHERAL SHAPE STYLE: RECTANGLE, FOUR HOLES
•
MATERIAL: ALUMINUM ALLOY 2024
•
HOLE DIAMETER: 0.171 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN
•
MOUNTING OPENING SHAPE STYLE: UNTHREADED HOLE
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE
•
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH: 0.157 INCHES NOMINAL IN
•
SECURING DEVICE TYPE: THREADED FASTENER
•
CROSS-SECTIONAL SHAPE STYLE: FLAT
TECHNICAL CHARACTERISTICS (FLIS)
PERIPHERAL SHAPE STYLERECTANGLE, FOUR HOLES
MATERIALALUMINUM ALLOY 2024
HOLE DIAMETER0.171 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN
MOUNTING OPENING SHAPE STYLEUNTHREADED HOLE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH0.157 INCHES NOMINAL IN
SECURING DEVICE TYPETHREADED FASTENER
CROSS-SECTIONAL SHAPE STYLEFLAT
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH0.157 INCHES NOMINAL IN
BODY THICKNESS0.062 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
28907-4Interchangeable
interchangeable cross-reference
interchangeable
12287Interchangeable
interchangeable cross-reference
interchangeable
48-12287-2Interchangeable
interchangeable cross-reference
interchangeable
F89E273Interchangeable
interchangeable cross-reference
interchangeable
C30100-080Interchangeable
interchangeable cross-reference
interchangeable
1228-8Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1228-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1228-7?
1228-7 is a PAD LOCKING manufactured by Jumbo. It is classified as a MRO (MRO_GENERAL).
What parts can replace 1228-7?
There are 8 known substitutes for 1228-7: 28907-4, 12287, 48-12287-2 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1228-7?
1228-7 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-360-2224. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1228-7

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026